This Screamin' Eagle Heavy Breather Elite picks up where the past generation Milwaukee-Eight Heavy Breather left off with a 15% air flow improvement! Redesigned to support even more performance with engine builds pushing over 135hp. The iconic Heavy Breather Air Cleaner features a forward-facing oiled cotton filter element that flows large volumes of clean air into the engine. The short, low profile cast tube rams the charge directly into the throttle body with little turbulence for increased power and torque, and the intake tube mounts to a custom back plate that features integral breathers and covers the throttle body electronics for a finished look. The slanted compact filter adds an aggressive performance look, and it is shaped to allow installation on Touring bikes equipped with fairing lowers.
...Read MoreFits '18-later Softail models and '17-later Touring (except '23-later FLHXSE, FLTRXSE, '24-later FLHX and FLTRX) and Trike models. All models require ECM calibration with Screamin' Eagle Pro Street Tuner or dealership installed Screamin’ Eagle calibration for proper installation. Does not fit on models equipped with fairing lower glove boxes or fairing lower speakers. ECE compliant on '21-later FLH, FLHRXS, FLHXS, FLTRXS, and CVO models. Pending approval for use in California on '21 models. Refer to H-D.com/shop for status.