Certifique-se de que a peça se adapta

Screamin' Eagle Twin Cam Conversion Kit - 103CI to 110CI

Parte | Número SKU: 92500032

Bring your Twin Cam motorcycle up to the same 110 cubic inch displacement and power output as the CVO™ Screamin' Eagle® models without expensive machining or removing the engine from the chassis. This street compliant kit combines the proven SE-255 cams and cylinder heads of the CVO™ model with exclusive Screamin' Eagle® bolt-on 4.0" cylinders and system-matched pistons to deliver high torque and reliable everyday performance.

  • Black highlighted

  • Automatic compression release-equipped cylinder heads and the flat top forged pistons combine to develop a 9.3:1 compression ratio for easy starting

  • Screamin' Eagle® lifters ensure quiet reliable valve train operation

  • Includes SE 4.0" bolt-on cylinders, CVO™ 110 cylinder heads, SE-255 cams, forged 9.3:1 compression pistons and rings, heavy duty clutch spring, top end and cam cover gaskets, and high-capacity roller tappets

  • Separate purchase of cam spacers is recommended and requires separate purchase of appropriate Automatic Compression Release Wiring Harness

  • All EFI-equipped models require dealer-installed ECM calibration download or use of Screamin' Eagle® Street Tuner Kit (priced separately)

  • Recalibration is required for proper installation, See Dealer for details, Labor cost not included

  • When installed by an authorized Harley-Davidson® Dealer at the time of vehicle delivery, these kits do not impact the vehicle's limited warranty

Fits ’14-'16 FLHTCU, FLHTCUL, FLHTK, FLHTKL and FLTRU models with Twin-Cooled engines. Does not fit Trike models, CVO™ 110 models, or models with engine cases that have been machined to accept large bore cylinders. Requires separate purchase of Screamin’ Eagle® high-flow air cleaner. Installation requires separate purchase of Primary Cover Gasket. Cam Drive Retention Kit P/N 91800088. Cam Spacer Kit P/N 25928-06 is recommended. All models require ECM calibration for proper installation.

Installation Instructions

Dealer Install Recommended:

Yes

ECM Calibration Required:

Yes

Sold Seperately:

cam spacers, compression release wiring harness

Sold In Units:

Each

Screamin' Eagle Stage Upgrade:

Stage IV

In the Box:

SE 4.0" bolt-on cylinders, CVO 110 cylinder heads, SE-255 cams, forged 9.3:1 compression pistons and rings, heavy duty clutch spring, top end and cam cover gaskets, and high-capacity roller tappets

WARRANTY:

1 year limited warranty – Go to www.h-d.com/warranty for full details