Screamin' Eagle Milwaukee-Eight Engine Stage III Kit - 107CI to 119CI

Référence de la Pièce : 92500096

This Stage III kit has been developed for the rider looking for a solid “seat of the pants” increase you can feel every time you roll on the throttle. The bump up in displacement and compression deliver a significant increase in torque and power over stock, all the while restoring the sensation of riding solo when you’re loaded down. Plus there’s a one-year manufacturer’s warranty and eligibility for coverage under factory vehicle warranty when dealer-installed within 60 days of vehicle purchase.

...Lire plus

Description

• Delivers up to 23% more horsepower and 17% more torque when compared to the Original Equipment engine configurations

• Delivers increased throttle response throughout the entire RPM range

• Provides thrilling acceleration when twisting the throttle

• Maintains flat torque curve from cruising RPM to redline

• Can be installed without removing the engine from chassis

• Includes 4.155" Big Bore Bolt-On Cylinders, Forged 11.0:1 High Compression Pistons and Rings, SE8-447 Torque Cam, High Capacity Tappets, High Performance Cam Bearing, Stage III Timer Cover & Insert

• Includes Multi-Layer Coated Head Gaskets, Cylinder Base and Cam Cover Gaskets, most necessary gaskets and seals

• 49-State U.S. EPA Compliant on select ’18-later Softail^™ models

Détails

Fits '18-later Softail^™ models equipped with 107CI Milwaukee Eight engine. FXFB models require separate purchase of Screamin' Eagle Softail High-Flow Exhaust System P/N's 64900828 or 64900829. Requires separate purchase of Cam Drive Retention Kit P/N 25566-06. Installation may require Cam Spacer Kit P/N 25928-06. All models require ECM calibration with Screamin' Eagle Pro Street Tuner for proper installation. Does not fit California models.

Installation Instructions

ECM Calibration Required: Yes

Sold Seperately: See fitment for details

Upgrade Stage Level: Stage III

Sold In Units: Each

In the Box: 4.155" Big Bore Bolt-On Cylinders, Forged 11.0:1 High Compression Pistons and Rings, SE8-447 Torque Cam, High Capacity Tappets, High Performance Cam Bearing, Stage III Timer Cover & Insert, Multi-Layer Coated Head Gaskets, Cylinder Base & Cam Cover Gaskets, most necessary gaskets and seals

Harley-Davidson^® motorcycles modified with some Screamin’ Eagle^® Performance products must not be used on public roads and, in some cases, may be restricted to closed-course competition. These performance parts are 49-state U.S. EPA compliant but are NOT compliant for sale or use in California on pollution-controlled motor vehicles. California guidelines on tampering can also lead to substantial fines and penalties. Screamin’ Eagle^® Performance products are intended for the experienced rider only.

Consulté(s) récemment

©2024 H-D ou ses sociétés affiliées. HARLEY-DAVIDSON, HARLEY, H-D et le logo Bar and Shield font partie des marques de commerce de H-D U.S.A., LLC. Toutes les autres marques de commerce appartiennent à leurs propriétaires respectifs.