Universal Mount Helmet Lock

Part Number 45732-86

FINAL SALE, NON-RETURNABLE

Quantity:

A A A

To limit grab-and-run theft, just unlock the hinged clasp, hang your helmet by its strap, and relock with the included key. Your helmet is held securely in place. In addition, hanging your helmet reduces the risk of impact damage if the helmet slipped off the seat or handlebar.

  • Designed to be installed on any .875" to 1.25" diameter tubing such as engine guards, saddlebag guards, and frame tubes
  • To be used only when motorcycle is parked and locked
  • Use key to engage and disengage the lock once helmets are in place
  • Includes 3 sets of screws of different lengths to allow the lock to fit onto 7/8 (22.2 mm), 1 (25.4 mm) and 1.25 (31.7 mm) round bars
  • Screws are tamperproof and cannot be removed to prevent theft
  • Duplicate keys are not available
  • For use on any motorcycle
A A A

Fits all models. All '02-'17 VRSC™, '15-later XG, '04-later XL and XR models require installation of engine guard.

Bike not listed?
Select your year and model to see all the parts that fit your bike.

  • SELECT
  • Model
Shop
A A A

Warning

Remove lock before operating motorcycle. Failure to remove lock could result in death or serious injury.

  • Warranty

    1 year limited warranty – Go to www.h-d.com/warranty for full details
  • Sold in Unit

    Each
  • In The Box

    1 lock and 2 keys
Universal Mount Helmet Lock is rated 3.1 out of 5 by 20.
Rated 4 out of 5 by from Simple deterrent Make no mistake; if someone wants your helmet, this won't stop them. But, it is enough of a deterrent that I feel confident leaving my helmet with my bike while I go inside a taphouse or a store. The "unremovable" screws are not necessary; if someone wanted your helmet, they wouldn't unscrew this, they'd just break it off. In addition, my wife dropped her bike and broke this and now we are having to drill out the screws to replace it. I'd suggest just using plain screws.
Date published: 2017-09-15
Rated 3 out of 5 by from The lock seems a little flimsy I have the feeling someone with a screw driver easily pop this lock with minimal effort and run off with my pricey $$$ Harley Davidson helmet. I also don't like that you can't just swing the lock shut and walk away - you actually have to use the key to open it and to lock it. This is awkward because my key is on a strap with my FOB and my car key so it's a diffcult maneuver holding the helmet up, holding the lock in place and turning the key to secure the lock. Again, it would be awesome to just close the lock and have it click shut. Otherwise, it looks great and works as a helmet lock! Just as advertised.
Date published: 2017-08-07
Rated 3 out of 5 by from Good lock Able to place on handle bars or highway bars. Good and functional to secure helmet.
Date published: 2017-07-09
Rated 5 out of 5 by from Very heavy duty! I was hesitant on my purchase of this locking device but in the end bought them. I see a few historical comments on keys fitting other bikes with the same lock but thought it isn't the Harley community which is going to steal your helmet its the other Jack wagons. I have been using gun trigger locks, long master locks and got tired of hanging our helmet's on the machine in a hack manner. At least this product is made well, looks good and it will take some work to get a helmet off, so I made the decision and glad of it.., so much easier and looks great!
Date published: 2016-12-07
  • y_2018, m_2, d_26, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_20
  • loc_en_US, sid_PA-17-4573286, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

How is it that this can fit two different diameters? .

Looking for a no gap fit such as with accessory handlebar clamps
Asked by: JB2011RK

What size bit and what kind do you use to install the lock it is special?

Asked by: Charby

Helmet Lock Assembly

The pin fell out on my Helmet Lock and while I was tapping in a new one a spring & ball fell out but I didn't see from where. Does anyone know where this spring (Very Very small and short) and ball go? Thanks Richard
Asked by: Harleyman
I'm answering my own question. It turns out there is NO spring & ball in the Helmet Lock. The spring & ball came from my socket extension. I was using it to tap in the new pin and evidently my taping popped the assembly out of the extension. Amateurs. Sorry folks, Richard
Answered by: Harleyman
Date published: 2014-12-10

Is it possible for these to be keyed alike?

I would prefer to have one key open either lock. I plan to install two unless one lock can hold two helmets.
Asked by: TABishop
The helmet lock keys can't be re-keyed, but you should be able to secure two half helmets to one bike.
Answered by: RockyXL883
Date published: 2013-10-23

Universal Mount Helmet Lock cannot be removed

I attached the helmet lock to my Street Bob 2013 handle bar. Is that fine? Also, I am not able to unscrew the lock using the standard screw driver. Is there any way I can unscrew the lock from my handle bar?
Asked by: RBeeF
They make a special screw driver for tamper proof screws , you can buy them at an auto parts store or e-bay or amazon
Answered by: arlo1961
Date published: 2016-06-13
  • y_2018, m_2, d_26, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_PA-17-4573286, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Recently Viewed

    loading
    Loading...
    Please Hold Your Iron Horses

    You've been sitting idle, so we've ended your session to protect your personal details.


    Continue as guest Sign in

    You’ve been sitting idle, so your session will expire in


    Would you like to remain signed in and continue shopping?


    Yes, keep me signed in No, sign me out

    Prices listed are generally the Manufacturer's Suggested Retail Price (MSRP), excluding taxes and shipping. Prices at local dealerships may vary. All online orders will be fulfilled and shipped by
    Harley-Davidson Motor Company as the agent for the Selling Dealer.