Simplify the process of securing your bike to a trailer or bike lift. These stylish chrome Tie-Down Brackets mount cleanly to the front fork cover and offer a secure method to connect tie-down straps.
- Moving the tie-down point from the handlebar to the triple-tree area reduces wear on the handlebar bushings and ensures a consistent easy-to-access mounting point
Fits '02-'17 FLS, FLSS, FLSTC, FLSTF, FLSTFB and FLSTFBS, '95-later FLHR, FLHRC and FLHRXS, '95-'13 FLHT, FLHTC and FLHX, '10-'13 FLHTCU and FLHTK , '10-'12 FLHXSE and '10-'12 FLHTCUSE. FLS, FLSS, FLSTF, FLSTFB and FLSTFBS models without a windshield require separate purchase of Hardware Kit P/N 91800030.
2012
- Softail Slim FLS
- Heritage Softail Classic FLSTC
- Fat Boy FLSTF
- Fat Boy Lo FLSTFB
- Road King FLHR
- Road King Classic FLHRC
- Electra Glide Classic FLHTC
- Ultra Classic Electra Glide FLHTCU
- CVO Ultra Classic Electra Glide FLHTCUSE7
- Electra Glide Ultra Limited FLHTK
- Street Glide FLHX
- CVO Street Glide FLHXSE3
Bike not listed?
Select your year and model to see all the parts that fit your bike.
-
Warranty
1 year limited warranty – Go to www.h-d.com/warranty for full details -
Sold in Unit
Pair -
In The Box
2 tie down brackets and all necessary installation hardware
Chrome Tie-Down Brackets is rated
out of
5 by
9.
Rated 5 out of
5
by
bigin314 from
tie downs are great
I bought these right before we left for biketoberfest. trailered down and back 1700 miles . made strapping bike a lot easier.
Date published: 2016-11-01
Rated 5 out of
5
by
dperry285 from
Recommend
These are easy to install and besides looking good are very functional
Date published: 2016-06-08
Rated 5 out of
5
by
Takoda from
Great Product
Looks great and fit perfect on my softail.. I would recommend these tie-down brackets. read instructions as the windshield grommets are meant to be mounted on the inside and the tie-down brackets are to be on the outside..
Date published: 2016-03-22
Rated 1 out of
5
by
Alcors11 from
Windsheld will not fit
I purchased a set of these tie down brackets for my spouse FLSTC. After i finished the install I could not install the stock windshield on the bike!!!
I had it remove the kit now its a paper weight.
Date published: 2015-06-27
Should inside washers be reinstalled?
Should I reinstall the inside washers on a 2016 FLSTC for proper windshield grommet spacing? The installation instructions do not specify regarding inner and outer washers.
Chrome tie down brackets
2003 Ultra Classic. Fit or not. And if not why not?
does the signal light wiring have to be disconnected to install brackets on my 2013 Street Glide. If so, does fairing need removed?
What's the correct torque specs when installing these?
Installing on 2012 FLHTCU ~Taken from the instruction sheet...
Install the auxiliary lighting bracket and tie down bracket. Tighten the screws to 3.95–5.08 N·m (35–45 in.lb.).
Stock bolt spec is 15-20 ft-lbs. Can't imagine when adding these ties downs (with the added stress of the tie down straps) that these would be tightened to only 35-45 in-lbs?
I am not sure the stock bolts were ever that tight, i put them on my 2016 heritage and only tighten them down to the in/pound setting and they seem fine but i havent trailered mine yet, the directions on alot of these parts have errors in them and maybe the foot pound should have been inch pounds,
They do tighten down on rubber bushings and foot pounds would just crush the bushings.
Date published: 2016-10-08
2002 RKC here. Figure and instructions seem wrong. Did you know? Bushing goes between nacelle and aux parking light bracket. Checked my SM too.
Recently Viewed
Loading...
Please Hold Your Iron Horses
Please Hold Your Iron Horses
