Chrome Switch Cap Kit

Part Number 71804-03


Finish / Color: Chrome



Not satisfied until everything you see is chrome? This Chrome Switch Cap Kit will add style to one of the most visible areas of your bike, the switches.

  • Kit contains a complete set of chrome switch caps for the left and right handlebar switches
  • Caps are a direct replacment for the standard equipment black switch caps
  • Replace the stock black caps without re-wiring
  • Shaped for the same ergonomic feel as the Original Equipment hand control switches
  • Chrome switch caps complement other chrome hand control accessories

Fits '02-'17 VRSC™, '96-'13 XL and XR, '96-'11 Dyna®, '96-'13 FLHR and '98-'01 FLHRC models. FLHR models equipped with Cruise Control use Kit P/N 71808-03.

Bike not listed?
Select your year and model to see all the parts that fit your bike.

  • Model
  • Side of Bike

    Left and Right
  • Warranty

    1 year limited warranty – Go to for full details
  • Sold in Unit

  • In The Box

    Chrome switch caps
Chrome Switch Cap Kit is rated 4.5 out of 5 by 4.
Rated 4 out of 5 by from Look Great, Pain to install! Looks Great, if you are having HD install then I say 5 out of 5 stars. However, if you're installing yourself I say 4 stars only because it was an absolute NIGHTMARE! Now I consider myself a decent backyard mechanic on cars, but have little to no knowledge on working on motorcycles so perhaps that was the issue. Instructions were good except I had to look up the instructions for the Chrome Switch Housing to dissemble the housings themselves. Otherwise no complaints here except I think I might let HD install my grips when I order them haha
Date published: 2016-02-03
Rated 5 out of 5 by from Great Look Long job. 4hrs. Work slowly with these, there is a lot to take apart and put back together. Be careful of the springs and remember these are plastic and if you break one you can't buy only one you, you need to pay for a whole new set. I put them in the black housing so the silver and black really pop. Glad I did it but just take it slow when you do yours
Date published: 2015-02-18
Rated 5 out of 5 by from Higher quality than stock These switch caps take a while to install, but it's well worth it. They look fantastic and unlike the stock ones, these are imprinted with the function, not silk screened which will soon wear off. Make sure you smear a little silicone grease on all surfaces that will touch while installing as this will help. Just take your time.
Date published: 2014-04-27
Rated 4 out of 5 by from Hard to install but worth it So the old caps come off easily, but trying to slide the new ones in place can give you arthritis. Be patient, if you brake the plastic posts they go on you'll spend a lot more. Keep in mind that these look chrome, but they are plastic.
Date published: 2014-03-17
  • y_2018, m_2, d_26, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_PA-09-7180403, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Looking for these in Black??

Bike has the black caps, but the original ones had most of the labels wear off. Had ordered a none HD set, and many worked fine, but for some reason the left turn signal one never worked right, and then the stop/run switch stopped working. Then bought another set from another vendor, and its left turn also wouldn't work. The right switch from that set worked for a while, but it has now stopped working. Changed the switch on the right about a year ago, after the start would kick in when I put the touch. Tech said there was moister in the switch, so replaced it. Went to dealership today, but parts couldn't find the black set, but only the chrome? Found the whole switches and housing in black, but that was about $250?? Parts person going to call to check the head quarters. Seems caps should be a simple thing?
Asked by: msetzerii48

Do the Chrome Switch Cap Kit covers come with the springs? My Start/ Run Switch , the spring brokle underneath. If not, any Ideas?...

Asked by: Ro513
Hi Ro513, These are for the caps only. Best thing for you to do is order a new switch unit through your HD dealer. It looks like the spring is not available separately, sorry. Thank you
Answered by: PeteHD
Date published: 2014-11-21
  • y_2018, m_2, d_26, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_PA-09-7180403, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Recently Viewed

    Please Hold Your Iron Horses

    You've been sitting idle, so we've ended your session to protect your personal details.

    Continue as guest Sign in
    Online Exclusives

    You’ve been sitting idle, so your session will expire in

    Would you like to remain signed in and continue shopping?

    Yes, keep me signed in No, sign me out

    Prices listed are generally the Manufacturer's Suggested Retail Price (MSRP), excluding taxes and shipping. Prices at local dealerships may vary. All online orders will be fulfilled and shipped by
    Harley-Davidson Motor Company as the agent for the Selling Dealer.