Speed-Check Transmission Dipstick

Part Number 37103-08


Finish / Color: Chrome



This decorative and functional dipstick is hand-operated, eliminating the need for a wrench.

  • Contains a Bar & Shield graphic
  • Easy to install

Fits '06-'17 Dyna® (except models with ABS) and '07-'17 Softail®, and '07-'16 Touring and Trike models. Will not fit Touring models equipped with Engine/Transmission Interface Cover P/N 66532-07.

Bike not listed?
Select your year and model to see all the parts that fit your bike.

  • Model
  • Warranty

    1 year limited warranty – Go to for full details
  • Sold in Unit

  • In The Box

    Speed-check transmission dipstick
Speed-Check Transmission Dipstick is rated 4.9 out of 5 by 24.
Rated 5 out of 5 by from Speed-Check Tranny Dipstick I just changed my Transmission Oil with Genuine HD Formula + Lubricants and just hated the Hex Head bolt dip stick that came stock with the bike. Now, no tools required to check Transmission levels . . . However, on a Softail Deluxe there is not much room to get your fingers around the dipstick. At any rate, it does look great and the Bar & Shield insert goes on with a 3M adhesive tape that is pre-stalled on the insert piece. Screw in the Dipstick first and get it snug before you add the insert so it lines up like you want it to. Highly recommend.
Date published: 2018-02-23
Rated 3 out of 5 by from Sticker Just fyi the dipstick bar and shield logo is a sticker you have to glue on.
Date published: 2018-01-20
Rated 5 out of 5 by from Alot better to look at! This looks better than the stock allen head that the bike comes with....shows that the bike has some kauhana's now!
Date published: 2017-05-21
Rated 5 out of 5 by from Speed-Check Transmission Dipstick I recently purchased Harley-Davidson's Speed-Check Transmission Dipstick for my 2016 Ultra Limited for two reasons. First, it makes checking the transmission oil level much easier because you don't have to use an Allen wrench to remove the dipstick, and second, it looks really cool with the bar and shield logo. I plan on purchasing the Oil Level & Temperature Dipstick - Lighted LCD Readout next so that I have two dipsticks that look like they belong together. I am going to wait to install the bar and shield logo until I have the new oil dipstick so that I can make sure the bar and shield logo is orientated the same direction as the oil dipstick. Easy installation. As others have said . . . why isn't this a standard issue part on touring bikes. It would not add that much to the baseline price.
Date published: 2017-04-06
  • y_2018, m_2, d_26, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_24
  • loc_en_US, sid_PA-10-3710308, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Is there a speed check tranny dipstick for a 2006 dyna wide glide fxdwgi? I don't see this bike listed..

Asked by: 4qvinnie
Try 62700192. It should fit your Dyna.
Answered by: Bill505
Date published: 2016-08-20

Is this metal or plastic?

Asked by: RGMike
Answered by: Mark1952
Date published: 2016-03-19

What is the proper way to check the tranny fluid with this new dipstick?

For example, check hot? Upright? Fluid should be between two lines?
Asked by: dmarkturner
Hi Dmarkturner, You would check the fluid with the Speed-Check Transmission Dipstick the same way you would you would check the stock transmission dipstick. The 2010 Touring Service Manual states: The transmission lubricant level should be checked monthly. The transmission should be drained and refilled with fresh lubricant at specified intervals. NOTE When checking the transmission lubricant level, the motorcycle should be leaning on the jiffy stand. If the motorcycle was recently moved or ridden, allow a short period of time to equalize lubricant level in the transmission compartments. Check Lubricant Level 1. Park motorcycle on its jiffy stand. 2. Remove the filler plug/dipstick and wipe off dipstick. 3. Place back in filler hole but do not thread in. (Filler plug/dipstick should rest on top of threaded hole.) Remove filler plug/dipstick and observe lubricant level. Level should be between the full and low marks on the dipstick.
Answered by: FXS78
Date published: 2015-07-08
  • y_2018, m_2, d_26, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_PA-10-3710308, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Recently Viewed

    Please Hold Your Iron Horses

    You've been sitting idle, so we've ended your session to protect your personal details.

    Continue as guest Sign in
    Online Exclusives

    You’ve been sitting idle, so your session will expire in

    Would you like to remain signed in and continue shopping?

    Yes, keep me signed in No, sign me out

    Prices listed are generally the Manufacturer's Suggested Retail Price (MSRP), excluding taxes and shipping. Prices at local dealerships may vary. All online orders will be fulfilled and shipped by
    Harley-Davidson Motor Company as the agent for the Selling Dealer.