Screamin' Eagle Ventilator Performance Air Cleaner Kit

Part Number 28722-10


Finish / Color: Gloss Black



Stylish low-profile exposed element air cleaner kit provides increased airflow to boost the power of your fuel injected engine. The track-inspired exposed element adds a purposeful look to the bike, and the included waterproof rain sock protects the filter during inclement weather.

  • Gloss black finish
  • Easy-to-install kit includes low-profile air cleaner cover, high-flow filter element, back plate, Screamin' Eagle® badge, protective rain sock, and all required installation hardware
  • Street legal when used with stock mufflers
  • All EFI-equipped models require ECM calibration (priced separately)

Fits ’10-'17 Dyna® (except '16-'17 FXDLS) and '10-'15 Softail® models (except '14-'15 FLSTNSE, '11-'12 FLSTSE and '13-‘14 FXSBSE). All models require ECM calibration for proper installation. '17 models require re-calibration with Screamin' Eagle® Pro Street Tuner (sold separately).

Bike not listed?
Select your year and model to see all the parts that fit your bike.

  • Model
  • These Screamin' Eagle® products are 50-state street-legal for sale and use on all vehicles, including those that are pollution controlled. Complies with the requirements of 40 CFR Part 86, subparts E and F.


Recalibration is required for proper installation, and will allow engine to rev to 6200 RPM.  See Dealer for details.  Labor cost is not included.

  • Warranty

    1 year limited warranty – Go to for full details
  • Requires ECM Calibration

  • Sold in Unit

  • In The Box

    Low-profile air cleaner cover, high-flow filter element, back plate, screamin' eagle badge, protective rain sock, and all required installation hardware
  • Upgrade Stage Level

    Stage I
Ventilator Air Cleaner Kit is rated 5.0 out of 5 by 5.
Rated 5 out of 5 by from Easy Install - Looks Better After reading multiple reviews and recommendations on HD and Revzilla, I picked this upgrade as my maiden bike mod. It was easy to follow and install. You do need the right tools to make it easier. I installed this on my 15 Fat Bob and there was a wire behind the stock filter plate that was not accounted for. I tied it up and hung it behind the metal plate on the new one. HD needs to take care of instructions for Dyna/Fat Bobs. There is definite notice of pickup and smoothness to the bike. I also plan to calibrate the bike.
Date published: 2017-08-13
Rated 5 out of 5 by from Works Great This along with Vance & Hines short shorts and Dyno tuned really woke the engine up. Along with running cooler. Only mod that should be done to the breather is a External Breather vent. The EPA has required Harley to route dirty, oily crankcase air back into the air cleaner compromising the performance of your engine. Just google "External Breather System"
Date published: 2017-07-09
Rated 5 out of 5 by from Love this air cleaner Took off my tear drop stage 1 air cleaner and put this one on,I should have done this a long time ago.My leg doesn't stick out with this one like it did with the other one.It looks good on my 2010 Street Bob and I couldn't be happier.
Date published: 2015-05-14
Rated 5 out of 5 by from Bought another one! This is the third Ventilator I purchased, one for my previous bikes (FHLR and FXDC), this one is for my 2012 FXDWG. They look great and add to the sound as well, way better then the cheaper Stage 1 filter upgrade! As an added bonus you'll get more knee room. Buy one and you'll won't regret it.
Date published: 2013-07-21
  • y_2018, m_2, d_26, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_PA-18-2872210, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Is this what you would use for an after market exhaust

I installed an after market slip on mufflers is this the kind of air cleaner I would use?
Asked by: markshadow9


If I had the recalibration done for a stage 1 air cleaner upgrade when I bought my Super Glide, would I still need to do it again for this upgrade?
Asked by: JJB07

Profile dimensions?

What are the depth (profile), height and width measurements of the Screamin' Eagle Ventilator Performance air cleaner? Thanks!
Asked by: Stephanie
The dimensions are 9.5" x 6.5" x 2.5" (W x H x D). The nice thing about the Ventilator (besides the looks) is that it only protrudes 4.5" measured from the outer edge of the air cleaner to the valve cover. No more knee hitting the air filter, it makes a big difference compare to the stock air cleaner. Hope this answers your question.
Answered by: QuietProfessional
Date published: 2015-11-30
  • y_2018, m_2, d_26, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_PA-18-2872210, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Recently Viewed

    Please Hold Your Iron Horses

    You've been sitting idle, so we've ended your session to protect your personal details.

    Continue as guest Sign in
    Online Exclusives

    You’ve been sitting idle, so your session will expire in

    Would you like to remain signed in and continue shopping?

    Yes, keep me signed in No, sign me out

    Prices listed are generally the Manufacturer's Suggested Retail Price (MSRP), excluding taxes and shipping. Prices at local dealerships may vary. All online orders will be fulfilled and shipped by
    Harley-Davidson Motor Company as the agent for the Selling Dealer.