Billet Tapered Slash 4 in. End Caps

Part Number 65100018


Finish / Color: Chrome



These End Cap kits allow you to personalize your Screamin' Eagle® Street Performance Touring Mufflers.

  • Billet tapered slash styling
  • Easy to install
  • Same finish as mufflers and exhaust shields for a consistent look front to back
  • Sold in pairs
  • Includes all required mounting hardware

Fits '09-'16 Touring and '09-later Trike models equipped with Screamin’ Eagle® Street Cannon 4.0" End Cap Mufflers. Does not fit 4.0" CVO™ Touring mufflers.

Bike not listed?
Select your year and model to see all the parts that fit your bike.

  • Model
  • Material Content

  • Material Diameter

    4.0 Inch
  • Warranty

    1 year limited warranty – Go to for full details
  • Sold in Unit

  • In The Box

    All required mounting hardware
  • Upgrade Stage Level

    Stage I
Billet Tapered Slash 4 in. End Caps is rated 3.7 out of 5 by 6.
Rated 5 out of 5 by from Nice looking exhaust tip! I installed these tips on my Street Cannons 2 years ago and so far they have held up nice. They still have a new look to them with a little help from a constant applied wax coat. They were pretty heavy and seem like the quality is very good. I see some issues with peeling chrome from other reviewers but so far so good with my set.
Date published: 2017-02-17
Rated 1 out of 5 by from Chrome peeling...after 9 months Like a previous reviewer, I've had the same problem with peeling chrome. I got these in August 2015 on my 2015 FLTRXS and after 7000 miles, the chrome began peeling where it connects to pipe. Looks really crappy. Quality on these started fine but man, I've got to replace them now. For 150 bucks, this is unacceptable quality. I love my Street Cannons but these end caps are terrible. ...9 months.
Date published: 2016-05-30
Rated 1 out of 5 by from Beautiful design and fit but... I installed these on the ends of my Street Cannons when I installed the Street Cannons on my 2011 FLHR in 2012. The look was beautiful and they fit perfectly. This past summer the chrome started peeling off the end of one of the end caps. (No damage, just poor chrome plating) So much for beauty...
Date published: 2016-01-02
Rated 5 out of 5 by from Upgrade from Stock - Keeping with the Stock Theme I installed these billet tips, along with a pair of Screamin' Eagle Street Cannons. The fit and finish are excellent and the flush chromed screws blend in nicely. The profile reminds me of stock pipe with the exception being that I installed them in the slash up position. I was able to compare them with straight tips and the sound was quite different. The billet tips produce a popping tone during acceleration. The straight tips rumble but lacked depth and resonance. These tips look and sound great. Worth the price . . . unless you enjoy hearing the cam chain and valve action that are louder when the stock pipes are on. Good investment.
Date published: 2014-09-13
  • y_2018, m_2, d_26, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_PA-06-65100018, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Can these end caps be rotated 180 degrees to point either up or down?

Asked by: SoCalBluetooth
I went ahead and ordered these caps. As I found out upon inspecting the caps, YES you can rotate them to point up or down because the set I received does not have a water drain hole machined into them. There are 3 screw holes in the caps where they attach to the inside mounting bracket. They are equally spaced apart and so you can rotate the caps 180 degrees with no problem. Also, I read another review that stated the screamin eagle mufflers fitted with these caps extended out farther to the rear than the OEM mufflers. That is not the case with my installation. They are exactly the same length as the originals. All you have to do is make sure the screamin eagle slip on mufflers are FULLY seated forward. If not pushed on all the way then they will extend out farther than the originals. Fit and finish of the end caps is great!
Answered by: SoCalBluetooth
Date published: 2015-02-18
  • y_2018, m_2, d_26, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_PA-06-65100018, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Recently Viewed

    Please Hold Your Iron Horses

    You've been sitting idle, so we've ended your session to protect your personal details.

    Continue as guest Sign in
    Online Exclusives

    You’ve been sitting idle, so your session will expire in

    Would you like to remain signed in and continue shopping?

    Yes, keep me signed in No, sign me out

    Prices listed are generally the Manufacturer's Suggested Retail Price (MSRP), excluding taxes and shipping. Prices at local dealerships may vary. All online orders will be fulfilled and shipped by
    Harley-Davidson Motor Company as the agent for the Selling Dealer.