FREE SHIPPING WITH $50 PURCHASE AND FREE RETURNS - LEARN MORE

Road Tech zumo 660 & 665 Fairing Mount Kit

Part Number 92238-09

FINAL SALE, NON-RETURNABLE

Quantity:

A A A

This installation kit is designed to allow fairing mounting of the Road Tech™ zumo 660 or 665 GPS System on specified Harley-Davidson® models. Positioned for convenient viewing by both the rider and passenger, the Mounting Kit easily accepts the slide-in connection cradle for the Road Tech™ zumo 660 or 665 GPS System.

  • Kit includes bracket and all required hardware
  • Installation requires drilling through inner fairing
A A A

Fits '96-'13 Electra Glide®, Street Glide® and Trike models equipped with Road Tech™ Zumo 660 or 665 GPS unit. Does not fit with Road Tech™ SiriusXM Satellite Radio P/N 76390-05A, '06-'10 CVO™ Electra Glide® models or models equipped with Fairing Dash Pad P/N 58262-05.

Bike not listed?
Select your year and model to see all the parts that fit your bike.

  • SELECT
  • Model
Shop
  • Water Resistant

    No
  • Warranty

    1 year limited warranty – Go to www.h-d.com/warranty for full details
  • Sold in Unit

    Each
  • In The Box

    Bracket and all required hardware
Road Tech zumo 660 & 665 Fairing Mount Kit is rated 3.8 out of 5 by 5.
Rated 5 out of 5 by from GPS Fairing Mount I installed the GPS mount on my 2010 Electra Glide Ultra Limited and couldn't be happier with the results. The template places the mount in a great location on the inner console and is very secure. I recommend that you take a look at this unit.
Date published: 2015-07-04
Rated 4 out of 5 by from Solid and tight The mount is ridged and keeps the unit from moving however for the "Bat Wing" touring bikes it works great! For the other glides it might give you a problem seeing the screen comfortably
Date published: 2015-06-28
Rated 5 out of 5 by from Great mount A great fixed position GPS mount which allows the cables to be routed inside the fairing making for a clean look. It gets the GPS off the handlebars and up where it can be seen. Viewing is most comfortable when in a more upright seating position.
Date published: 2014-07-23
Rated 4 out of 5 by from Road Tech zumo 660 & 665 Fairing Mount Kit The instructions and template make installation extremely easy. You may have to drill a slightly bigger hole for cables if you do not buy the Road Tech unit but rather the Garmin 665 Zumo. The harness needs a little more room to push through the fairing. The only negative about this mount is that it is a fixed position and the GPS is not angled exactly the way I would prefer and can not be adjusted. But it is there and secure!
Date published: 2014-01-26
  • y_2018, m_2, d_26, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_PA-08-9223809, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Will this mount kit fit the bolt pattern of the Zumo 550 cradle?

I have a zumo 550 and cradle that I wish to mount on my 2011 street glide fairing. Will this mounting kit work with the 550 cradle four-bolt pattern?
Asked by: Dick93

Where is the charging fuse located for the zumo fairing mount located.

My zumo no longer charges in the mount but will charge with a cable plugged in from my PC. Thinking the problem may be a blown charging fuse for the mounting unit. Where is the fuse located.
Asked by: Robinsmel
Hi Robinsmel, Take a look at the illustration below, this will tell you how to replace the fuse in the Zumo.
Answered by: Rockstar883
Date published: 2016-04-16

can you use this mount if you have winsdield pouches on?

Asked by: Lumpy
Hello Lumpy, Yes, you should be ablet to use this with a windshield pouch. Please check all clearances before you drill into your inner fairing. Thank you!
Answered by: JD34
Date published: 2015-02-18

Will this work with HD mini ape handlebars or will the bars and clutch cable be in the way?

Asked by: dmayville
Hey Dmayville, This part is exclusively for models listed under our fitment category for this item. To install this item, there must be a fairing board to be drilled into. The mount has be secured for the Road Tech to be applied. As far as ape handles are concerned, that should not be a problem as long as the lines are not at risk of being tangled. It's hard to tell since I do not have a pic of the bike.
Answered by: RowdyGrl79
Date published: 2016-02-11
  • y_2018, m_2, d_26, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_PA-08-9223809, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Recently Viewed

    loading
    Loading...
    Please Hold Your Iron Horses

    You've been sitting idle, so we've ended your session to protect your personal details.


    Continue as guest Sign in
    Online Exclusives

    You’ve been sitting idle, so your session will expire in


    Would you like to remain signed in and continue shopping?


    Yes, keep me signed in No, sign me out

    Prices listed are generally the Manufacturer's Suggested Retail Price (MSRP), excluding taxes and shipping. Prices at local dealerships may vary. All online orders will be fulfilled and shipped by
    Harley-Davidson Motor Company as the agent for the Selling Dealer.