Road Glide Chizeled Handlebar - Gloss Black

Part Number 55800440


Finish / Color: Gloss Black



Bring cutting edge style to your custom bagger. The Batwing Chizeled Bar combines the rise of a 14" mini-ape with the edgy profile of the classic “Z" bar and the wrist position of a drag bar. The result? An aggressive hands-in-the-air riding posture.

  • Gloss black finish
  • Fat 1.25" Chizeled Bar replaces mitered and welded corners with cast seamless 90° bends for added strength and style
  • Cast elbows eliminate sharp internal bends and the bar features removable Bar & Shield plugs to simplify internal wiring
  • See Guides tab for additional components required for installation

Fits '15-later FLTRU, FLTRX and FLTRXS models. Does not fit '18-later FLTRXSE or models equipped with 21" KnockOut Wheel Kit P/N 43300494 or 43300496. All models require separate purchase of additional components. Does not fit CVO™ models. Does not fit models with Black Rubber Heated Hand Grip Kit P/N 56100034.

Bike not listed?
Select your year and model to see all the parts that fit your bike.

  • Model


Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake lines for some models. Handlebar height is regulated in many locations. Check local laws to ensure your motorcycle meets applicable regulations.

  • Material Content

  • Material Diameter

    1.25 Inch
  • Tip-to-Tip

    31.0 Inch
  • Base Width

    12.50 Inch
  • Knurl Center-to-Center

    3.0 Inch
  • Rise

    14.0 Inch
  • Pullback

    6.25 Inch
  • Warranty

    1 year limited warranty – Go to for full details
  • Sold in Unit

  • In The Box

    Handlebar with removable plugs
Road Glide Chizeled Handlebar is rated 4.6 out of 5 by 5.
Rated 5 out of 5 by from Fit and Finish are perfect Had these bars installed by Salem Harley Davidson on my 2017 Road Glide Ultra. I also used the Black Chrome Cable Kit. The bars and cables all match in gloss black and look incredible. I blacked out the whole bike starting with a Billet Silver and Vivid Black bike, so the finish was important to me. All the factory parts have a matching black finish that looks so deep it's like you could reach right into them. I'm very happy.The height is great although they feel just a little narrow at first for such a big bike. After riding several hundred miles, the bars feel just great to me. I recommend these to anyone wanting black color and sharp corners rather than the rounded bends of the other bars.
Date published: 2017-07-16
Rated 3 out of 5 by from Not recommended for wide shoulder width I am 6,0 215 and have broad wide shoulders. This fit is too narrow, 31 inches.. i should have tried these first. I dont hate them, i'm just going to find something wider, like 38-40 and maybe a smidgen lower.
Date published: 2016-12-16
Rated 5 out of 5 by from Life behind bars These bars are awesome. The angles are right on. They feel good and handle very well. IMO you will want the wire extension kit and the clutch/brake upgrade. It could save you from headaches down the road.
Date published: 2016-08-03
Rated 5 out of 5 by from chizeled bars these are great nice comfortable height they actually sit me up more and make it a nice ride. I was concerned about having to twist my wrist but with these I dont wrist are lined up great I just all around LIKE this bar on my 2015 Road Glide Special had them on for 3 weeks and 2000 miles no complaints
Date published: 2016-01-17
  • y_2018, m_2, d_26, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_PA-09-55800440, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Gas Gauge

While riding to the bars block the view of the gas gauge?
Asked by: Tokmann420

Height and pullback

I'm interested in these for my 2017 Road King Special, what the difference in height and pullback compared to my stock bars?
Asked by: cpwusmc

Width between top of bars

What is the width between the top of the bars? I would have a concern that the gap is too narrow for my taste. Thanks much!
Asked by: austinbri
The dims between the between the Road Glide Chizeled bars is 10" at bottom and 11.75" at top. They are very comfortable.
Answered by: DrPepper
Date published: 2018-02-01

Can I put these bars on a 2016 soft tail slim

I really like these bars can you tell me why they won't fit on my 2016 soft tail slim
Asked by: Purdy
Hi Purdy, No, you cannot install these on your 2016 Softail Slim (FLS) because the wiring is configured for part of the Road Glide Family. Hope this helps
Answered by: RowdyGrl79
Date published: 2016-07-15


How much more Height will I get with these bars.. MattD am considering these if you have them installed can you send me pics so I can compare I just bought a 2016 FLTRS
Asked by: malinois
Hey malinois, The stock bars on the '16 FLTRX have a 9.5" rise and a 10.5" pullback, so you're gaining 4.5" inches in rise and loosing 4.25" in pullback.
Answered by: Rockstar883
Date published: 2016-01-15
  • y_2018, m_2, d_26, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_PA-09-55800440, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Recently Viewed

    Please Hold Your Iron Horses

    You've been sitting idle, so we've ended your session to protect your personal details.

    Continue as guest Sign in
    Online Exclusives

    You’ve been sitting idle, so your session will expire in

    Would you like to remain signed in and continue shopping?

    Yes, keep me signed in No, sign me out

    Prices listed are generally the Manufacturer's Suggested Retail Price (MSRP), excluding taxes and shipping. Prices at local dealerships may vary. All online orders will be fulfilled and shipped by
    Harley-Davidson Motor Company as the agent for the Selling Dealer.