Replacement Windshield

Part Number 58433-96


Finish / Color: Clear



Formed of polycarbonate and available in a size that suits your riding needs.

  • 22" Clear replacement windshield
  • Formed of hardcoated polycarbonate for strength and scratch resistance
  • Kit includes screen, cushion cross brace tape, and installation instructions

Fits '94-later Road King® models (except '13-'14 FLHRSE).

Bike not listed?
Select your year and model to see all the parts that fit your bike.

  • Model
  • Tint

  • Material Content

  • Material Width

    23.10 Inch
  • Windshield Height above Headlamp

    22.0 Inch
  • Windshield Overall Height

    29.0 Inch
  • Warranty

    1 year limited warranty – Go to for full details
  • Sold in Unit

  • In The Box

    Screen, cross brace tape and instructions
Replacement Windshield is rated 5.0 out of 5 by 5.
Rated 5 out of 5 by from High Windshield Love the benefits of a tall windshield 22 inch ,2 inches over my stock 20 inch shield on my 2010 Road King Classic. In my case very very little head Buffeting at high speeds . I was amazed that 2 inches taller would make that kind of difference in head Buffeting. Replaced my stock 20 inch windshield in about half an hour. ,I used a flat utility knife razor blade to get under chrome strips and slide blade gently to remove them from old windshield. Just read instructions and install is easy. Only one drawback, I don't like looking through the windshield instead of over it, sort of distorts images through my prescription sun glasses but I am getting used to it its nothing critical. I like this windshield on long fast speed I 95 trips, good rain and head protection.
Date published: 2015-09-15
Rated 5 out of 5 by from Tall windshield I needed a taller windshield for my Road King so I looked on the HD site and found a 22" model. I wanted a 20" model but couldn't find one. The 22" is a little too tall for me because I like looking over the windshield and not through it. When the windshield arrived, it was straight-up plexiglass, but had the mounting holes. Take your time disassembling the frame off old one. The plates are stainless but they are very thin, and if not handled properly, could get misshapen and then it is a bear to straighten out - that's if you can get it straightened. All in all, new windshield, not as much blow on the face or body #for us guys that don't like it#, and the looks are cool. On a side note, I may have it taken to a plastic cutter to take that 2" off the top. Caaarrrrefuully.
Date published: 2015-05-22
Rated 5 out of 5 by from No brainer this windshield has a very good quality, the holes are drilled to fit the frame. Installation of the frame was a little tedious as you have to remove the old tape from the frame kit but once that is done it is a straight forward procedure. Took me about 15 minutes for the whole installation. Can be performed by unexperienced riders :)
Date published: 2015-04-13
Rated 5 out of 5 by from Replacement 2" over Clear Lexan Windshield The windshield has made my riding much more fun again. I commute to work on weekdays, except for days when it is raining in the morning. Appearance: Beautiful replacement Lexan windshield. The box was crushed a little, but the windshield was clear and not scratched. My old windshield was crazed from the sun and I was barely able to see through it. It made the bike look older than it is. (it is a 1994 FLHR) Function: I choose the 2” over replacement windshield by mistake and have found that the extra 2” relieves more of the wind buffeting I used to experience. Installation: it is a fairly straight forward swap of the Stainless hardware from the old shield to the new. The hard part was removing the old tape that was applied to the stainless. I used a razor blade and was able to remove all the old tape. I polished the brackets and loosely installed the brackets with the hardware and a bit of Locktite, then installed the windshield on the bike and tightened everything.
Date published: 2014-11-24
  • y_2018, m_2, d_26, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_PA-20-5843396, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

What is the part number for the metal quick release frame that fits this windshield?

After ordering and receiving this 22" windshield for my 2016 Road King, I am now interested in being able to switch back and forth between the stock 20" to the new 22" quickly without having to disassemble the stainless frame from the windshield each time. Please advise of the part number of just the frame that will fit my bike and this windshield. Thank you.
Asked by: TheRoadking
  • y_2018, m_2, d_26, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasquestions, tq_1
  • loc_en_US, sid_PA-20-5843396, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Recently Viewed

    Please Hold Your Iron Horses

    You've been sitting idle, so we've ended your session to protect your personal details.

    Continue as guest Sign in
    Online Exclusives

    You’ve been sitting idle, so your session will expire in

    Would you like to remain signed in and continue shopping?

    Yes, keep me signed in No, sign me out

    Prices listed are generally the Manufacturer's Suggested Retail Price (MSRP), excluding taxes and shipping. Prices at local dealerships may vary. All online orders will be fulfilled and shipped by
    Harley-Davidson Motor Company as the agent for the Selling Dealer.