Mustache Engine Guard

Part Number 49000078


Finish / Color: Gloss Black



Combine classic shape and modern function for a unique twist on engine protection.

  • Complements the bike's traditional style while the gracefully curved upper section incorporates highway pegs into the shape
  • Integrated rubber pads offer a comfortable and slip-resistant cushion for your feet while traveling the open road
  • One-piece engine guard kit includes all required mounting hardware

Fits ’06-'17 Dyna® models. ’14-'17 FXDL, FXDLS (all markets) and ’15-'17 Dyna® (India models only) require separate purchase of Horn Relocation Bracket P/N 69000058. Fits with Oil Cooler Kit P/N 26151-07. ’07-’08 FXDSE and ’09-’10 FXDFSE requires removal of front chin spoiler and separate purchase of Regulator Caddy P/N 70464-08A. ’06-’11 models equipped with evap canister also require separate purchase of Canister Bracket P/N 47207-06. ’12-'17 models equipped with evap canister require separate purchase of Canister Relocation Kit P/N 60800005.

Bike not listed?
Select your year and model to see all the parts that fit your bike.

  • Model


Engine guards may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very low speed slide). They are not made nor intended to provide protection from bodily injury in a collision with another vehicle or any other object. Do not use engine guard footpegs or highway pegs under normal stop and go operating conditions. Doing so could result in death or serious injury.

  • Warranty

    1 year limited warranty – Go to for full details
  • Sold in Unit

  • In The Box

    Engine guard and required mounting hardware
Mustache Engine Guard is rated 4.8 out of 5 by 11.
Rated 5 out of 5 by from Savior Just bought my first bike in July, this mustache engine guard was installed upon purchase. As newbie riders do I dropped my bike 2 times (getting gas and stopping on gravel) and this guard kept the bike standing so not to drop on the tank. Thank the lord for that. The crash bar really held up when I dumped my bike going about 20 mph and locked up my front breaks, the bar bent up but kept my bike from laying down as it came to a halt after I was tossed. The only damage to the bike was on the bottom of my pipes. I WILL 110% be buying a new guard for this spring. This is a must have especially for new riders.
Date published: 2018-01-29
Rated 5 out of 5 by from 2015 Street Bob Mustache Guard I installed on my 2015 Street Bob. Easy fast install. Works fine with forward controls. All the hardware fits, but spread the U bolts slightly to keep from scratching the down tubes. Every thing fit perfectly. I blacked out all the hardware with black plasti coat dip.
Date published: 2017-09-12
Rated 4 out of 5 by from Solid product but additional parts needed for FXDB This is more an informational note than a review because I never got this installed. I ride a 2016 Street Bob and the fitment section says this engine guard will work, but unless I'm missing something, it fails to mention that for my bike a bracket relocation kit is required for the box mounted to the lower front of the frame which helps support the engine. I ended up returning this guard because I don't have the correct tools to support the engine and do that relocation. So just be aware of that before buying. Seems like a solid part though. I just wish it mounted where highway pegs bolt on instead of with those U bolts.
Date published: 2016-12-24
Rated 5 out of 5 by from Nice accessory Comparing blacked out options for engine guards this one looked like a good option. It's priced well, rugged like most things Harley, installed easy and it's a neat/functional look on a FatBob. Recommended.
Date published: 2016-07-07
  • y_2018, m_2, d_26, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_en_US, sid_PA-07-49000078, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Is everything you need to mount to bike included?

Asked by: therealmike
Hi TheRealMike, Yup, the mounting hardware needed to install the Mustache Engine Guard is readily available and included. Good Luck!!!
Answered by: RowdyGrl79
Date published: 2017-07-24

Need replacement foot rest pad part number

Hit a deer with this engine guard, it broke the rubber foot rest. Anyone have the part number for the replacement rests?
Asked by: LaynexSiren

2015 Street Bob W/ forward controls???

Wil this fit my 2015 Street Bob W/ forward controls???
Asked by: Dan562
Yes. I just installed on my own 2015 Street Bob with forward controls. No problem and looks great. Buy it...........
Answered by: magrue
Date published: 2017-11-11

Will this work with forward controls?

2014 Street Bob with forward controls. I couldn't find anything in the description about it working with them. Thanks
Asked by: TommyTwoGuns

need to know the weight please

Asked by: faby
Hi Faby, The Mustache Engine Guard approximately 11.96lbs. Thanks!
Answered by: RowdyGrl79
Date published: 2016-09-30
  • y_2018, m_2, d_26, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_14
  • loc_en_US, sid_PA-07-49000078, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Recently Viewed

    Please Hold Your Iron Horses

    You've been sitting idle, so we've ended your session to protect your personal details.

    Continue as guest Sign in
    Online Exclusives

    You’ve been sitting idle, so your session will expire in

    Would you like to remain signed in and continue shopping?

    Yes, keep me signed in No, sign me out

    Prices listed are generally the Manufacturer's Suggested Retail Price (MSRP), excluding taxes and shipping. Prices at local dealerships may vary. All online orders will be fulfilled and shipped by
    Harley-Davidson Motor Company as the agent for the Selling Dealer.