Free Shipping with $50 Purchase + Free Returns

Mini Footboard Kit

Part Number 50451-09


Finish / Color: Chrome



This Mini Footboard Kit can be installed in place of traditional footpegs and provides a little additional leg support and more options to move your feet around on a long run. Mini Footboards mount to standard H-D® style footpeg supports, and can be used in many rider and passenger applications.

  • Chrome & rubber
  • Larger than a bicycle pedal, footboards can be pivoted to the proper angle for maximum riding comfort
  • Sole-gripping horizontal black rubber bands add vibration isolation and a rich appearance to the pegs

Fits rider position: VRSC™ models with forward controls (except VRSCDX and VRSCF), '15-later XG models (except XG750A), '06-earlier XL, '07-'10 XL883, XL883C, XL883R, XL1200C and XL1200R, '07-'11 XL1200L, Dyna® (except FLD), and Softail® models with forward controls (except FXCW, FXCWC, FXS, FXSB or FXBSE). Fits passenger position: All models with H-D® male-mount passenger peg mounts (except ’06-earlier VRSC™, ’03-earlier XL, ’05-earlier Dyna® and Softail® models equipped with Shotgun exhaust). Softail® models require separate purchase of Support Kit P/N 50454-09. Fits highway peg position: All models with frame-mount or engine guard-mount highway pegs (except Whiskers Adjustable Highway Bar P/N 50855-09 and 50865-09).

Bike not listed?
Select your year and model to see all the parts that fit your bike.

  • Model
  • Rider Position

  • Side of Bike

    Left and Right
  • Warranty

    1 year limited warranty – Go to for full details
  • Sold in Unit

  • In The Box

    Left and right footboards
Mini Footboard Kit is rated 4.0 out of 5 by 9.
Rated 5 out of 5 by from Wife Loves them Easy to install took me less than a half hour. They look good on the bike and my wife is very happy with the feel on her feet.
Date published: 2017-04-23
Rated 2 out of 5 by from Mini Footboards for Softail These appear to be fantastic quality, but just as other reviewers have noted. they will not stay in the up position when you do not have a passenger on board. i have even put more bend in the clip to help tighten them up, but they will not stay in the upright position when solo riding. Very displeased!
Date published: 2015-05-26
Rated 3 out of 5 by from Passenger mounted mini footboard kit Well not a bad installation by any stretch and much nicer than the OEM pegs. After a using them a couple of times the passenger side drops down after a few bumps and thumps. I figure I will try a new retention washer but I don't expect it will help and I will intimately have to figure out to effectively tighten it up. One would figure for all the shekels they charge for these things they would have a retention adjustment feature. In my book there is nothing worse than having to re-engineer a product so it actually works like it's suppose to.
Date published: 2014-10-11
Rated 5 out of 5 by from Happy feet! I found the OME pegs to be uncomfortable and limiting the motion of my feet. These mini boards are much more comfortable allowing the movement of my feet in all directions. Big improvement!
Date published: 2014-09-15
  • y_2017, m_5, d_21, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_US, sid_PA-07-5045109, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

What mounting hardware do I need with this in Rider Footboard position

I have a 2017 Road Glide Ultra and want to change out the footboards with these mini footboards. The current footboard has 2 mounting points and it dose not appear to work with these new boards. What part is needed to get these mounted?
Asked by: rgreger

Would these work as highway pegs, mounted to the long angled adjustable highway peg mount ?

Asked by: Piercer

2016 Dyna Low Rider fit

Will this work as driver foot board on a 2016 Low Rider. It just says footboard, not whether it is for driver or passenger.
Asked by: denorton7392

Will this work on my 2004 Fat Boy that has been converted to a trike.

I have converted my 2004 Fat Boy using a Motor Trike Spartan kit. They used stock pipes for this. I also wonder if I need the support kit it says that is required for Softails since 2004 isn't listed in the Fitment list for the support kit (50454-09).
Asked by: Kandykane

They are listed as fitting the 2015 HD Street 750. Do they actually fit in the driver position?

Looking to get some mini footboards for my street 750 and these are listed as fitting. Is that the case or would I need something additional to make them compatible. Also, could I use them as highway pegs instead on the engine guard?
Asked by: jediahmiller2
Hi Jediahmiller2, The Mini Footboard Kit will work on the Street 750--depending on the year. It is designed to be installed as Rider/Passenger--not driver. Hope this helps!
Answered by: RowdyGrl79
Date published: 2016-06-10
  • y_2017, m_5, d_21, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_US, sid_PA-07-5045109, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

You Might Also Like

Recently Viewed

    Please Hold Your Iron Horses
    Learn how to check store availability


    You’ve been sitting idle, so your session will expire in  minutes.

    Would you like to remain signed in and continue shopping?

    Yes, keep me signed in No, sign me out

    Prices listed are generally the Manufacturer's Suggested Retail Price (MSRP), excluding taxes and shipping. Prices at local dealerships may vary. All online orders will be fulfilled and shipped by
    Harley-Davidson Motor Company as the agent for the Selling Dealer.