FREE SHIPPING WITH $50 PURCHASE AND FREE RETURNS - LEARN MORE

License Plate/Turn Signal Relocation Kit

Part Number 68544-10

FINAL SALE, NON-RETURNABLE

Quantity:

A A A

A necessary addition when attaching a saddlebag on Dyna® models.

  • Required for Installation of Detachable Saddlebags P/N 90181-08A
A A A

Bike not listed?
Select your year and model to see all the parts that fit your bike.

  • SELECT
  • Model
Shop
  • Position on Bike

    Rear
  • Warranty

    1 year limited warranty – Go to www.h-d.com/warranty for full details
  • Sold in Unit

    Each
  • In The Box

    Relocation hardware
License Plate/Turn Signal Relocation Kit is rated 4.0 out of 5 by 4.
Rated 5 out of 5 by from Taillight conversation kit I love the way the product looks after installing. It is time consuming! But looks and works great!
Date published: 2015-12-12
Rated 4 out of 5 by from Looks Great Worse part about this kit is fishing the wire through the tubing. This alone took me several hours and partially stripped some spots in the wiring. The wiring also has a special crimp connection that you need a special tool for. I used fittings I had at home with my current crimp tool. One of the threaded studs is broken because I backed into my parked car and will now be attempting this again. I really like the look.
Date published: 2015-07-18
Rated 4 out of 5 by from License plate and STT relocation Very good product and was very easy to install the only problem I had was trying to get the wires through the tube fish tape or mechanics wire were too big to pull them through with the tape to hold the wire on the wire or fish tape so I used weed eater string and super glued each wire to it and pulled them through one at a time then I cut the inch of wire that was super glued off.
Date published: 2014-03-14
Rated 3 out of 5 by from Wiring can be tricky Be ready to get frustrated with the wiring if you install this by yourself. Also, make sure you have a bike lift.
Date published: 2014-01-20
  • y_2018, m_2, d_26, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_PA-11-6854410, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Detachable Backrest Installed

I have a 2014 wide glide I'll be putting this on. The dealership has already relocated the turn signals once to install the backrest. Looking at the picture and the diagram of this kit, wouldn't it just be a matter of disconnecting the signals and running the wires back through the fender and down to the kit or am I missing something?
Asked by: EJ72

I'm considering this kit as I don't like the side mounted license plate. Can you provide a picture of what it looks like installed?

Picked up my 2016 FXDWG yesterday. My wife, who followed me home, bitched about how she hated the side mounted license plate. I'm not crazy about the look either. More important, it sticks out far enough where there is a potential to catch on something when maneuvering in tight quarters and rip the bad boy off. I want to see exactly what this relocation kit looks like installed before I make the purchase. Maybe someone else out there who already has installed this can share a picture. Other than this issue I absolutely love my Wide Glide. This is my 3rd Harley and after driving only about 30 miles today it is my favorite. Love the torque of the 103 cubic inch.
Asked by: Mobius

Does kit hide bolt holes for existing license plate?

Just wondering how this is going to look on my 12 wide glide. Having a lot of problems with fender cracking due to vibration (twice now once in warranty again out of warranty) from license plate weight on tail light. Want to get some of the weight off of the light but am concerned about the look and if the three bolts that hold plate to light will be hidden behind the bracket.
Asked by: kwcommando

Will the turn signals be reused or are new signals part of the relocation kit? I asked this question because one of my turn signals is scratched.

Asked by: Wayneskow
Hi Wayneskow, The turn signals are reused in this kit. If you click on the "Dyna Rear Stop/Tail/Turn Signal Relocation Kit Instruction Sheet" link, under the "More Info" tab, the very last page shows you what is included in this kit. Thank you for your question.
Answered by: FXS78
Date published: 2015-07-07

How do I remove bolt on side-mounted license plate that I am replacing with this assembly?

The bolt is really Stuck on there,won't budge! New 2014 Dyna Wide Glide and we are afraid of 'forcing' it! Did they use Loctite on it?
Asked by: durangojoy
Hello Durangojoy, I would recommend taking it to your local dealer to have them assist you. They will better be able to advise and possibly remove it for you to avoid any damage that could happen if you "force it". Thank You!
Answered by: JD34
Date published: 2015-04-24
  • y_2018, m_2, d_26, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_PA-11-6854410, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Recently Viewed

    loading
    Loading...
    Please Hold Your Iron Horses

    You've been sitting idle, so we've ended your session to protect your personal details.


    Continue as guest Sign in

    You’ve been sitting idle, so your session will expire in


    Would you like to remain signed in and continue shopping?


    Yes, keep me signed in No, sign me out

    Prices listed are generally the Manufacturer's Suggested Retail Price (MSRP), excluding taxes and shipping. Prices at local dealerships may vary. All online orders will be fulfilled and shipped by
    Harley-Davidson Motor Company as the agent for the Selling Dealer.