Front Directional Relocation Kit

Part Number 68517-94A


Finish / Color: Chrome



This kit includes the required hardware and wiring to move the front directional from the handlebar to the lower triple clamp.

  • Chrome finish

Fits '88-later XL (except XL1200CX, XL1200T, XL1200X, XL1200XS and '11-later XL883L and XL1200C) and '91-'05 Dyna® models (except FXDWG and FXDXT).

Bike not listed?
Select your year and model to see all the parts that fit your bike.

  • Model
  • Warranty

    1 year limited warranty – Go to for full details
  • Sold in Unit

  • In The Box

    All necessary mounting hardware
Front Directional Relocation Kit is rated 4.5 out of 5 by 13.
Rated 1 out of 5 by from Do not following the installation instructions unless you want an ugly install Like an idiot I blindly followed the instructions where it says... 5. Cut wires connected to right directional light about 2 inches away from directional light body. If you cut it 2" away from the turn signal body, it will look like a rigged up piece of junk. I did that on one of the turn signals and after I saw the error of the instructions I cut the other one 12" back so you can hide the splice behind the forks. Shame on Harley for even thinking cutting the wires 2" from the turn signal is a good idea. And shame on me for following the directions and not thinking it through for myself. I am now trying to figure out how to remove the wires from inside the turn signal so I can re-run a single wire to behind the headlights. My otherwise pristine Harley now looks stitched together... Ugh. Lesson learned.
Date published: 2017-08-09
Rated 5 out of 5 by from Nice Look This relocation kit is easy to install and looks great. It offers a lot of bang for the buck. Instead of messing with the tank and cutting wires, I just disassembled the turn signals and pulled the wires down through the handlebar clips and riser and routed to the new location. Did remove plate on back side of riser to help pull wires through. You will need a curved pick and needle nose pliers to get the signals apart. Used a zip ties to hold wires behind headlamp mount. XL 2007C
Date published: 2016-06-11
Rated 5 out of 5 by from Front Directional Relocation Kit Gives a better look to my bike. Install was easy and only took about an hour.
Date published: 2016-05-09
Rated 5 out of 5 by from good fit for 98 Sportster The shipping was fast Looks great on a 98 Sportster. Put front turn signals in a great spot. Easy to follow directions and easy to install.
Date published: 2015-12-23
  • y_2018, m_2, d_26, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_13
  • loc_en_US, sid_PA-11-6851794A, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Why wouldnt this fit a 2016 883 Superlow?

The lower triple tree is the same as the Iron 883. I also checked for clearance when the steering column is turned either way and it should fit. So what about this kit would not fit a 2016 883 Superlow specifically? Thank you for your time.
Asked by: Olderine
Hi Olderine-- For technical assistance, we suggest contacting a local dealership for information. There are a number of variables that can affect the fitment of a particular item. Wiring, mounting hardware, and relocation--just to name a few. Thanks!
Answered by: RowdyGrl79
Date published: 2016-08-15

The 2015 Inspiration Gallery

The 2015 Inspiration Gallery shows this being used on a 2015 1200 custom, but the fitment section says this wont fit a 2015 1200 Custom. So my question is why wont it fit when you show it fitting and give a part listing in the gallery saying it will? Is this just a mistake and it will actually fit?
Asked by: RoninSoul88


2015 parts catalog says that fits 88 later XL (except XL1200T, XL1200X and later XL883L) So,by the previous mentioned fits to 2015 XL1200C . Online says doesn't fit. What is the correct information?
Asked by: TDIAM
Hi TDIAM, No, this Front Directional Relocation Kit will not fit on a 2015 XL1200C. I do apologize for the typo that is on page 709 of the 2015 P&A catalog, but the correct fitment statement can be found on page 77 of the 2015 P&A catalog. Thank you for your question.
Answered by: FXS78
Date published: 2016-01-16

Fitment for 2013 1200 Custom

Will this kit fit a 2013 1200 Custom? If not, is there another relocation kit I can use?
Asked by: fightinIrish
Hey fightinIrish, This will not work on the 13' 1200C and we do not have a kit for that model unfortunately. Thank you
Answered by: PeteHD
Date published: 2014-12-11

Does this part fit a 2014 Low Rider? Fitment section is confusing at best...

Asked by: DynaLoRider
Hello DynaLoRider, PN 68517-94A will not fit a 2014 FXDL. The fitment for this item is: '88-later XL (except XL1200T, XL1200X, '11-later XL883L and XL1200C) and '91-'05 Dyna® models (except FXDWG and FXDXT). You would need to order PN 69433-08A Thank You!
Answered by: JD34
Date published: 2014-11-17
  • y_2018, m_2, d_26, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_PA-11-6851794A, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Recently Viewed

    Please Hold Your Iron Horses

    You've been sitting idle, so we've ended your session to protect your personal details.

    Continue as guest Sign in
    Online Exclusives

    You’ve been sitting idle, so your session will expire in

    Would you like to remain signed in and continue shopping?

    Yes, keep me signed in No, sign me out

    Prices listed are generally the Manufacturer's Suggested Retail Price (MSRP), excluding taxes and shipping. Prices at local dealerships may vary. All online orders will be fulfilled and shipped by
    Harley-Davidson Motor Company as the agent for the Selling Dealer.