Engine Guard Kit

Part Number 49010-06

FINAL SALE, NON-RETURNABLE

Finish / Color: Chrome

Quantity:

A A A

Protect your bike without sacrificing ground clearance or style.

  • Chrome-plated finish
  • One-piece engine guard
  • Designed to complement the lines of the bike
A A A

Fits ’06-'17 Dyna® models. ’14-'17 FXDL, FXDLS (all markets) and ’15-'17 Dyna® (India models only) require separate purchase of Horn Relocation Bracket P/N 69000058. Fits with Oil Cooler Kit P/N 26151-07B. ’07-’08 FXDSE and ’09-’10 FXDFSE requires removal of front chin spoiler and separate purchase of Regulator Caddy P/N 70464-08A. ’06-’11 models equipped with evap canister also require separate purchase of Canister Bracket P/N 47207-06. ’12-'17 models equipped with evap canister require separate purchase of Canister Relocation Kit P/N 60800005.

Bike not listed?
Select your year and model to see all the parts that fit your bike.

  • SELECT
  • Model
Shop
A A A

Warning

Engine guards may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very low speed slide). They are not made nor intended to provide protection from bodily injury in a collision with another vehicle or any other object. Do not use engine guard footpegs or highway pegs under normal stop and go operating conditions. Doing so could result in death or serious injury.

  • Material Diameter

    1.25 Inch
  • Warranty

    1 year limited warranty – Go to www.h-d.com/warranty for full details
  • Sold in Unit

    Each
  • In The Box

    Engine guard and required mounting hardware
Engine Guard Kit is rated 4.0 out of 5 by 18.
Rated 5 out of 5 by from Took a long time to decide which bar to go with At the end, the chrome standard engine guard was my choice. Glad I went that way too. Today I kept my eyes peeled for engine guards, and noticed most if not all of the black ones are scratched up. Makes sense, more reason to go with chrome. Took the plunge, put it on myself (required a new bracket for the EVAC). After an hour, I was done. Very pleased with the look and feel.
Date published: 2017-11-27
Rated 3 out of 5 by from Quality Material Nice looking at a distance. Heavy, will most likely do the job. The lower attachment is not the greatest. Looks like it was just thrown together in some ones garage. Held on with U bolts. Not what I expected from Harley. Probably could find an aftermarket that works just as well.
Date published: 2017-09-29
Rated 5 out of 5 by from Excellent quality, easy installation Less that 10 minutes to add additional protection to my motorcycle. Quality exceed my expectation.
Date published: 2017-09-19
Rated 5 out of 5 by from more chrome I think there is no chrome piece available that I have not put on my fat bob, but looking at it I noticed that I could buy a chrome engine guard for more chrome. Looks great took me less than 10 minute to install. It is nice to know if I every dump my bike again I will have the guard in place. Chrome will come back again blackout look is a bad phase. Everyone who seems my Fat Bob goes very cool bike, it is the chrome.
Date published: 2017-07-28
  • y_2018, m_2, d_26, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_18
  • loc_en_US, sid_PA-07-4901006, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Fit with forward controls?

Will this fit a 2007 FXDL with forward-controls? Can't tell from photos or product details if the guard will interfere with forward-mounted brake and shift lever.
Asked by: TajMahal

Can you put hwy pegs on this?

Asked by: kc7vlu
Hi kc7vlu, Yes, the Engine Guard Kit can be used with highway pegs. Thanks!
Answered by: RowdyGrl79
Date published: 2016-08-12

Will this fit my '08 Super Glide custom with a Rider floorboard kit p/n 50500247?

Asked by: EdSled

HWY BARS

WHAT IS THE DIAMETER OF THE TUBE?
Asked by: JAROME
Hi Jarome, This Engine Guard Kit has an overall diameter of 1.25 inches. Thank you for your question.
Answered by: FXS78
Date published: 2015-06-24

does it fit with ... ?

hello, what is the diameter of this part ? does this part fit with 360 Degree Adjustable Highway Peg Mounting Kit-50832-07A Part Number 50832-07A
Asked by: SirBandar
  • y_2018, m_2, d_26, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_PA-07-4901006, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Recently Viewed

    loading
    Loading...
    Please Hold Your Iron Horses

    You've been sitting idle, so we've ended your session to protect your personal details.


    Continue as guest Sign in

    You’ve been sitting idle, so your session will expire in


    Would you like to remain signed in and continue shopping?


    Yes, keep me signed in No, sign me out

    Prices listed are generally the Manufacturer's Suggested Retail Price (MSRP), excluding taxes and shipping. Prices at local dealerships may vary. All online orders will be fulfilled and shipped by
    Harley-Davidson Motor Company as the agent for the Selling Dealer.