H-D Detachables Sideplates

Part Number 53815-00A

FINAL SALE, NON-RETURNABLE

Finish / Color: Chrome

Quantity:

A A A

In the time it takes for a traffic light to change, you can transform your motorcycle from a city cruiser to a cross country hauler. Forming the base for this quick change act are H-D® Detachables™ Sideplates.

  • Chrome finish
  • Combine with your choice of sissy bar upright and backrest pad
  • Adding or removing is a simple "slide and click"
A A A

Fits '00-'17 FLSTC and '00-'03 FLSTS models. Also fits '05-'15 FLST and FLSTSC models with Heritage Saddlebag P/N 90876-05. Requires separate purchase of Docking Hardware Kit and may require Directional Relocation Kit. See chart for your application.

Bike not listed?
Select your year and model to see all the parts that fit your bike.

  • SELECT
  • Model
Shop
  • Mounting Style

    Detachable
  • Adjustable

    No
  • Material Content

    Steel
  • Warranty

    1 year limited warranty – Go to www.h-d.com/warranty for full details
  • Sold in Unit

    Pair
  • In The Box

    Detachable sideplates and upright mounting screws
  • Sold Separately

    Docking hardware
H-D Detachables Sideplates is rated 4.0 out of 5 by 2.
Rated 4 out of 5 by from Quick Detach for Sissy Bar This was purchased for a 2011 Heritage so all I needed extra was the hardware kit for use with saddlebags. Moving the taillight assembly is not necessary for the newer model Heritage. Instructions for installing the hardware kit include not only the detachable side plate but also two other available accessories so it can get a little confusing. If you are mounting the side plate kit only, my recommendation is to study the illustration in figure 15 on the last page and you will get the picture. Before you can install the new hardware, you have to remove the old rigid side plates. A tip: remove the bag mount studs first and then loosen the rear most Torx screw (do NOT remove completely) and carefully swing the mount to the rear. Install the two new mounting bolts and then remove the Torx screw and side plate and continue with the install. I say this because if you remove all three bolts at once, the part behind the fender that holds the bolts in place falls out of position and is difficult to get back into place because of the small gap between the tire and the inside of the fender. All in all the hardware kit is by far the most time consuming part of the swap. The side plates are a no-brainer. All the parts are complete and are very well made. My only complaint is the price of the hardware kit ($39.99) which is way too much for what you get. My sissy bar and luggage rack now swap out in a matter of seconds.
Date published: 2014-07-02
Rated 4 out of 5 by from Works great In my case there is a small amount of play in the attachment mechanism that wasn't there when it was hard-bolted which you can hear when hitting bumps but I'm still happy with it.
Date published: 2013-08-20
  • y_2018, m_2, d_26, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_PA-01-5381500, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

docking kit, will it mount with my existing quick release saddlebag kits?

docking kit for quick release rear passenger sissy bar, will it mount with my existing quick release saddlebag kit? 2009 HD heritage softtail with quick release saddle bags already installed. What is docking station part # and I do not need a backrest, existing one is mint.
Asked by: charlie8486

Can I use stock backrest with new detachable sideplates?

Just bought a 2017 Heritage and would like to install detachable sideplates, do I need a new backrest and pad or will the stock ones the bike came with work with the detachable sideplates? Also do I need to order the mounting hardware with the plates for the 2017 model?
Asked by: chicagoclan

I have a 2019 Heritage Softail Classic and would like to install detachable side plates, P/N 53815-00A.

Will the OE backrest with OE pad fit the detachable side plates? Please verify docking hardware P/N 53931-03A
Asked by: Ultrahog94

I have a 2013 heritage. I already have detachable saddle bags and was wondering if it is still possible to put on detachable side plates?

Asked by: coopernicus
Hi Coopernicus, I am assuming you have a Heritage Softail Classic?! H-D does offer a detachable for a 2013 FLSTC. The part number for this item is 53815-00A. FYI: It is still possible, but may require a few "minutes" of your time. Hope this helps!
Answered by: RowdyGrl79
Date published: 2016-11-15

How do i mount my side plates for my back rest with my saddle bags on? The rear saddle bag bolt hits the plate.

Asked by: creep
Hello Creep, If you are usint the OEM saddlebags, make sure you are using docking hardware PN 53822-00A for installing the detachable sideplates. If you are and are still having issues, please see your local dealer for assistance. Thank You!
Answered by: JD34
Date published: 2015-04-27
  • y_2018, m_2, d_26, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_PA-01-5381500, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Recently Viewed

    loading
    Loading...
    Please Hold Your Iron Horses

    You've been sitting idle, so we've ended your session to protect your personal details.


    Continue as guest Sign in

    You’ve been sitting idle, so your session will expire in


    Would you like to remain signed in and continue shopping?


    Yes, keep me signed in No, sign me out

    Prices listed are generally the Manufacturer's Suggested Retail Price (MSRP), excluding taxes and shipping. Prices at local dealerships may vary. All online orders will be fulfilled and shipped by
    Harley-Davidson Motor Company as the agent for the Selling Dealer.