Replacement Windshield Screen

Part Number 57754-04


Finish / Color: Clear



Tailor your existing windshield for your riding preference. Replace the original windshield with a screen sized to improve wind protection.

  • 23" Clear windshield
  • Uses your existing mounting brackets and hardware for an easy, economical conversion

Fits '86-'17 FLS, FLSS, FLSTC, FLSTF, FLSTFB and FLSTFBS, '06 FLST and '93-'96 FLSTN equipped with a H-D® Detachables™ King-Size Windshield. Does not fit Springer™ models.

Bike not listed?
Select your year and model to see all the parts that fit your bike.

  • Model
  • Tint

  • Material Content

  • Material Width

    23.10 Inch
  • Windshield Height above Headlamp

    23.0 Inch
  • Windshield Overall Height

    28.30 Inch
  • Warranty

    1 year limited warranty – Go to for full details
  • Sold in Unit

  • In The Box

    Windshield, tape and installation instructions
Replacement Windshield Screen is rated 3.3 out of 5 by 4.
Rated 3 out of 5 by from Wrong item well, unfortunately it was the wrong item, and did not fit a 1997 Heritage Softail Classic. The verticle holes were off quite a bit. It was the proper size, but would not fit old mounting hardware. On an up note, the return was effortless.
Date published: 2017-09-10
Rated 1 out of 5 by from Did not fit Check the fit online stated this windshield would fit a 1994 Heritage Softail Classic which when I received it it did not fit
Date published: 2016-04-10
Rated 5 out of 5 by from Good windshield When I purchased my FLSTC the previous owner had cut the windshield down and didn't do a very good job of it so I purchased this one and I am glad I did.This windshield blocks the wind as it should and there is no buffering effect like you get out of some windshields.It was a snap changing all the hardware from the old one to this one.If I ever am in need of another one I will definitely go back to this one.
Date published: 2016-03-26
Rated 4 out of 5 by from replacement windshield nice windshield but issues on shipping ; the box could had more packing around the plastic covered windshield . 2 scratches were on the windshield but did not want to send it back
Date published: 2014-10-07
  • y_2018, m_2, d_26, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_PA-20-5775404, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Windshield Replacement

Hello, I own a 2012 Heritage Softail Classic. It currently has the stock windshield with quick detachable set up. Will this particular model fit the bolt pattern of the stock mount ?? Additionally I am looking to get this to alleviate the helmet shake I receive when I cruise. I am 6' tall and I feel I just need a few inches more on the windshield height and that should alleviate the helmet shake. Any ideas ?? Thank You !!
Asked by: ntlchps


I would like to see hole spacing dimensions. How can I be sure the windshield holes will match up with the trim hole spacing?
Asked by: Jap69
Hi Jap69, On the top row from the center, the middle holes is 6.35 inches from the center, and the outer holes is 9.66 inches from the center. From the top down, the middle holes are 4.85 inches from the top, and the bottom holes are 10.83 inches from the top. The bottom holes are also 6.72 inches from the center. You can be sure that the Detachable King-Size Windshield for FL Softail Models with Auxiliary Lighting will fit because the fitment tab states "Fits '86-later FLS, FLSTC, FLSTF, FLSTFB, '06 FLST and '93-'96 FLSTN equipped with a H-D® Detachables™ King-Size Windshield. (Does not fit Springer™ models.)" Thank you for your question.
Answered by: FXS78
Date published: 2015-03-11

Windshield measurement

How is the windshield measured? I would like a windshield a couple inches shorter than the one on my bike. I need to determine the size of the current windshield.
Asked by: Wilbur
Hi Wilbur. We measure out Windishields using two measurements. The first is the height above headlamp - which is the measurement from the headlamp cut-out to the top of the windshield. The second measurement is the overall windshield height which measures the windshield from top to bottom. The measurements for this windshield are: 23.0 Inches, 28.30 Inches respectively. Thanks!
Answered by: HDJuneauAve
Date published: 2015-10-18

Hole measurement

Are they 2.5x7x7x2.5
Asked by: Spider31e
Hi Spider31e, I'm not sure I'm understanding what your question is regarding. If you can provide more detail, we can help to better answer your question! Thanks!
Answered by: Wisco832
Date published: 2014-03-17
  • y_2018, m_2, d_26, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_PA-20-5775404, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Recently Viewed

    Please Hold Your Iron Horses

    You've been sitting idle, so we've ended your session to protect your personal details.

    Continue as guest Sign in
    Online Exclusives

    You’ve been sitting idle, so your session will expire in

    Would you like to remain signed in and continue shopping?

    Yes, keep me signed in No, sign me out

    Prices listed are generally the Manufacturer's Suggested Retail Price (MSRP), excluding taxes and shipping. Prices at local dealerships may vary. All online orders will be fulfilled and shipped by
    Harley-Davidson Motor Company as the agent for the Selling Dealer.