Curved Pull Back Fat Riser

Part Number 56269-09

FINAL SALE, NON-RETURNABLE

Finish / Color: Chrome

Quantity:

A A A

With a subtle curve that also adds an element of style, these pull back risers with flat bar brings the handlebar approximately 5" closer to the rider (as compared to stock FXSTB) without compromising the original styling of your Night Train™ model. Perfect for riders without a long reach or for riders who prefer sitting a little straighter in the saddle.

  • 4" Curved Riser
A A A

Bike not listed?
Select your year and model to see all the parts that fit your bike.

  • SELECT
  • Model
Shop
A A A

Note

Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake lines for some models. Handlebar height is regulated in many locations. Check local laws to ensure your motorcycle meets applicable regulations.

  • Material Content

    Aluminum
  • Material Height

    4.0 Inch
  • Material Diameter

    1.25 Inch
  • Pullback

    1.30 Inch
  • Warranty

    1 year limited warranty – Go to www.h-d.com/warranty for full details
  • Sold in Unit

    Each
  • In The Box

    Handlebar clamps, risers and screws
Curved Pullback Riser is rated 5.0 out of 5 by 6.
Rated 5 out of 5 by from Looks very sharp This riser looks very sharp. I will say if your looking for a big change from stock you will not get that from this riser. What you get is a cleaner look with a slight raise in handlebars and a very slight pull back from stock. What I like and was looking for was a more upright sitting position and that is exactly what you get. These risers do put the grips slightly closer to you but it is very slight. Now it does raise the height of the handlebars at least 2 1/2 more inches. Really helps in achieving a more upright riding position.
Date published: 2018-02-07
Rated 5 out of 5 by from Much more comfort! I installed the 4" pullback risers and poly bushings on my 2016 fatboy, along with lots of other genuine HD parts, and now ride in a much more comfortable position. I'm 5' 8". I kept the stock bars which I like. This product is beefy and beautifully finished. I managed to do the install without needing to change any lines or wiring, though if I had bought the 6" risers I'd have to change the top brake line for sure. The stock lines are just long enough. I think the bike looks even better now too... definitely recommend these risers for those looking for a bit more relaxed riding position.
Date published: 2017-04-20
Rated 5 out of 5 by from Perfect riding position for me. I put these on my '06 Fatboy. My height is 5' 8" and I have the Reach seat. I now have a better riding position for longer trips. The only thing I noticed was a little more vibration at higher speeds (65 mph and higher). The vibration is not unbearable compared to the comfort value. I kept the stock rubber bushings under the risers; they have the poly risers. I might try the poly; haven't decided. All that said, I would not go back to the stock risers. Can't believe I went this long without them.
Date published: 2016-12-03
Rated 5 out of 5 by from Nicer finish and built quality Truly good product which fits well. WORTH INSTALLING
Date published: 2015-08-24
  • y_2018, m_2, d_26, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_PA-09-5626909, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Can this 4" Pullback riser fit on my Bike without changing any of the stock cables?

I have fatboy 2015 with stock handle bar.
Asked by: Mohamed
Hello Mohamed, Please contact your local dealer for assistance with what additional components may be needed. Thank You!
Answered by: JD34
Date published: 2015-04-20

Does this fit 2014 dyna super glide custom?

Asked by: Darryl
The stock bars on a '14 FXDC are 1", so these risers won't work unless you switch out your bars for 1.25"s.
Answered by: Rockstar883
Date published: 2014-11-12

for a stock 2012 Fatboy Lo will I need longer cables or brake lines

Asked by: JohnK
Hi JohnK, With the Curved Pullback Fat Riser you will need to exchange cable and brake lines. Please see your local dealer for additional components. Thanks!
Answered by: RowdyGrl79
Date published: 2016-04-01
  • y_2018, m_2, d_26, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_PA-09-5626909, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Recently Viewed

    loading
    Loading...
    Please Hold Your Iron Horses

    You've been sitting idle, so we've ended your session to protect your personal details.


    Continue as guest Sign in

    You’ve been sitting idle, so your session will expire in


    Would you like to remain signed in and continue shopping?


    Yes, keep me signed in No, sign me out

    Prices listed are generally the Manufacturer's Suggested Retail Price (MSRP), excluding taxes and shipping. Prices at local dealerships may vary. All online orders will be fulfilled and shipped by
    Harley-Davidson Motor Company as the agent for the Selling Dealer.