Free Shipping with $50 Purchase + Free Returns

Curved Handlebar Riser Kit

Part Number 56066-82A

FINAL SALE, NON-RETURNABLE

Finish / Color: Chrome

Quantity:

A A A

These chrome-plated Risers provide a comfortable riding position for those who like the shape, width, and hand position of their current 1'' handlebar, but wish it was a closer. For an ergonomically-friendly ride, these risers can be combined with a Harley-Davidson® Reduced Reach forward-position seat and Profile Low suspension components to reduce arm stretch and to plant the feet firmly on the ground.

  • 4" Curved Risers
A A A

Bike not listed?
Select your year and model to see all the parts that fit your bike.

  • SELECT
  • Model
Shop
A A A

Note

Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake lines for some models. Handlebar height is regulated in many locations. Check local laws to ensure your motorcycle meets applicable regulations.

  • Material Content

    Aluminum
  • Material Height

    4.40 Inch
  • Material Diameter

    1.0 Inch
  • Pullback

    1.50 Inch
  • Warranty

    1 year limited warranty – Go to www.h-d.com/warranty for full details
  • Sold in Unit

    Each
  • In The Box

    Risers and screws
Curved Handlebar Riser Kit is rated 3.3 out of 5 by 3.
Rated 5 out of 5 by from Thanks HD What an awesome difference in the ride. Great fit. No additional parts needed to complete the job. My shoulders were cramping in about 15 minutes on my Fatboy. After a few minutes to get used to the new riding position I made an 80 mile run and I felt great!!!! I wish I installed the risers the day I bought the bike!
Date published: 2015-11-22
Rated 4 out of 5 by from Excellent Positioning, Easy Install, Okay Looks I'm 5'8" and had an issue with my positioning on my 2104 Heritage. I got a sharp pain in my upper back after an hour of riding and knew it was the forward position of the handlebars. No amount of adjustment backward would solve the problem. I installed these risers and now my position is terrific. No pain. I sort of feel like I'm sitting back in an easy chair and I like the feel. By the way, I didn't need to replace the cables on my bike with these risers. Recently a sales guy at the Harley dealership expressed disbelief that I didn't have to change cables--even hinting that I might be stupid. The two cables that are the most important are the clutch and brake cables--and while there isn't a lot of play in them they aren't being pulled beyond their limits. I did have to slightly adjust the brake cable's support point with a zip-tie. Looks-wise these risers are slightly disappointing only because the original risers on my 2014 are 1.5" in diameter and are "chunky-looking". These riser are only 1" in diameter so they look skinny. Also, in order to cover the 1.5 inch mount you have to buy a pair of 1.5" chrome "washers" to dress up the base appropriately. Harley sells them and they're made to jerry-rig these skinnier risers to the 1.5" base. The other bummer is that my cool-looking 2014 top-clamp is now useless because these risers require an offset top-clamp. So count on buying one of those too if you have a non-offset top-clamp. All in all I'm happy with them but if Harley makes a chunkier version someday I'll sure buy them.
Date published: 2015-08-03
Rated 1 out of 5 by from It fits, but... I put these on my 2014 Iron and after one ride, took them back off! The risers caused the speedometer to be positioned nearly vertical and made unusable. Unless you're willing to relocate your speedometer to a tank side mount and order a new riser clamp, too, don't get these for your bike! Why are there no straight risers offered for my bike?
Date published: 2015-04-18
  • y_2018, m_2, d_26, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_PA-09-5606682A, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

2018 FLHCS cables

will new cables / cables extensions be needed to install on 18 FLHCS? since the diameter of the riser is 1" and the original is 1.5", is there a bushing or chrome washer to hide where the original riser sat?
Asked by: MikeTex

Will these curved handlebar risers fit on a 2016 Roadster? Will there be any other replacement parts needed if so?

part # 56066-82a
Asked by: mieears
Hi Mieears, Yes, the Curved Handlebar Riser Kit will fit a 2016 Roadster. Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake line for some models. Thanks
Answered by: RowdyGrl79
Date published: 2016-06-20

2014 Road King risers for more pullback

I was told by my dealer that even if I change the nacelle to use these risers they would hit the speedometer housing. Is he right?
Asked by: David357

Does this really fit a 2015 road king? what else do I need

I didnt think you could put these on a road king with the riser cover do you just scrap the riser cover ? or do I have to get a different one? if so where do I find it.
Asked by: motorcitymadman

Thanks for answering my previous question. I have one more for you:

If I put these risers on my 2016 FLRT will I need to extend my cables? If so, do you sell a cable extension kit? Thanks Al
Asked by: Al71
Hello Al71, You will have to use a cable extension, which the part is sold in your local dealership. Thank you for your question.
Answered by: Iceman25
Date published: 2015-10-09
  • y_2018, m_2, d_26, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_en_US, sid_PA-09-5606682A, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Recently Viewed

    loading
    Loading...
    Please Hold Your Iron Horses

    You've been sitting idle, so we've ended your session to protect your personal details.


    Continue as guest Sign in

    You’ve been sitting idle, so your session will expire in


    Would you like to remain signed in and continue shopping?


    Yes, keep me signed in No, sign me out

    Prices listed are generally the Manufacturer's Suggested Retail Price (MSRP), excluding taxes and shipping. Prices at local dealerships may vary. All online orders will be fulfilled and shipped by
    Harley-Davidson Motor Company as the agent for the Selling Dealer.