Chizeled Lo Handlebar - Chrome

Part Number 55800568


Finish / Color: Chrome



With a low 9.00" rise and a flat drag-bar hand position, this compact Z-bar will place the rider into an aggressive, tucked-in riding posture.

  • 1.25" Chizeled Bar replaces mitered and welded corners with cast seamless 90° bends for added strength and style
  • Cast elbows eliminate sharp internal bends
  • Features removable Bar & Shield plugs to simplify internal wiring
  • Available in brilliant chrome or gloss black finish to match your bike’s custom direction
  • See Guides tab for additional components required for installation

Fits '15-later FLTRX and FLTRXS models. Does not fit '18-later FLTRXSE or models equipped with 21" Knockout™ Wheel Kit P/N 43300494 or 43300496. All models require separate purchase of additional components. Does not fit CVO™ models.

Bike not listed?
Select your year and model to see all the parts that fit your bike.

  • Model
  • Material Content

  • Material Diameter

    1.25 Inch
  • Tip-to-Tip

    31.60 Inch
  • Base Width

    11.25 Inch
  • Knurl Center-to-Center

    3.0 Inch
  • Rise

    9.0 Inch
  • Pullback

    6.42 Inch
  • Warranty

    1 year limited warranty – Go to for full details
  • Sold in Unit

  • In The Box

    Handlebar only
  • Sold Separately

    Additional installation components
Chizeled Lo Handlebar is rated 4.4 out of 5 by 5.
Rated 5 out of 5 by from OUTSTANDING APPEARANCE AND HANDLING This is an excellent replacement handlebar for me at 6'0", 185lbs and long arms. You will reach a little bit more compared to the RGS stock handlebars but the Chizeled Lo gives you better control and handling. I didn't want any handlebars over 10" because I'm not a fan of the "Big Ape Bars." Installation was easy as far as removing the stock bars and wiring which took about 30 minutes. Now the P.I.D.A. I had. Fishing the wires through the new bars. 3 hours and I was still unsuccessful. Fearing I would go "Beast Mode" on the bars trying to fish the wiring through, I gave up and took the bars to my Harley dealership and they had the wiring installed in about 30 minutes. Brought the bars back home and installed them on my bike. These bars were installed with all original wiring and brake/clutch lines so I'm not sure what issues or who's suggesting that new lines and wiring extensions are needed. I have a Klock Werks 14" Sport Flare Windshield so when I installed the new bars my mirrors were hitting the the shield when I turned the bars fully left and right. Easy fix............. removed the bars, tapped the set pin in flush with the riser base with a punch pin, reinstalled the bars, rolled the bars back about an inch. Then I sat on the bike and adjusted the brake master cylinder and clutch assemblies, I now have about and 1/2" clearance between the mirror bars and windshield and I can clearly see objects to the rear of me in my mirrors. Great bars for a great price.
Date published: 2018-01-23
Rated 4 out of 5 by from Be prepared to reach Bought these in chrome for my 2017 RGS. Chrome quality is excellent and there are access caps to aid with pulling wires. These have a hole drilled for the pin attached to the handle bar base. My biggest complaint is at 6' and with pretty long arms, these bars are a stretch. I have mine pulled all the way back, as far as the pin would allow anyway. I think 10" would suite me better. HOWEVER, what a difference over the cramped and low stock bars! They advertise as putting you in an aggressive position and that they do. The difference in handling is dramatically improved and I am way more confident behind these bars. Took 1.5 hours to install myself and needed no extra's. Added HD's "get a grip", grips as well. If you have short arms, sit on a bike with these before you buy.
Date published: 2016-10-16
Rated 4 out of 5 by from Check windshield clearance These bars look great and are easy to install. No extra wiring or cables needed, but be careful what windshield you choose. The bars wouldn't work with my Klock Werks 14 inch Sport Flare windshield. No matter how I adjusted the bars they would hit the windshield.
Date published: 2016-07-25
Rated 5 out of 5 by from Great look and great feel I like the look and feel of these bars. I was able to install the bars with no wiring issues. Was also able to install the bars with the stock cables. No cables required at all
Date published: 2016-05-05
  • y_2018, m_2, d_26, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_PA-09-55800568, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

18 CVO Road Glide

will these fit this bike as the website is saying no.....can you explain why they won't?
Asked by: bdhouse61

Would these bars fit a 17 road king if risers are changed out?

Asked by: HotFL13

Are the bars higher or lower than the stock bars on a '17 Road Glide

Also, are they further forward or further back?
Asked by: Hypecat

Are these same rise as stock or will they be a little higher do to less pullback?

Asked by: RGS2016
  • y_2018, m_2, d_26, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasquestions, tq_4
  • loc_en_US, sid_PA-09-55800568, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Recently Viewed

    Please Hold Your Iron Horses

    Your Session has timed out

    You've been sitting idle, so we've ended your session to protect your personal details.

    Continue as guest Sign in


    You’ve been sitting idle, so your session will expire in

    Would you like to remain signed in and continue shopping?

    Yes, keep me signed in No, sign me out

    Prices listed are generally the Manufacturer's Suggested Retail Price (MSRP), excluding taxes and shipping. Prices at local dealerships may vary. All online orders will be fulfilled and shipped by
    Harley-Davidson Motor Company as the agent for the Selling Dealer.