Boom! Audio Music and Communications Kit

Part Number 69200865

FINAL SALE, NON-RETURNABLE

Quantity:

A A A

Add rider headphone-access to music and helmet microphone activation of voice recognition and hands-free phone features of the Boom!™ Box Radio.

  • Plug-in wiring harness allows rider to connect a standard 7-pin DIN communications headset to the radio to maximize the use of the infotainment system's convenience features
  • Discrete tank port accepts 7-pin plugs for rider
  • Works with Boom!™ Audio full- and half-helmet music and communication headsets
  • Kit includes wiring harness, rider plug-in ports, weatherproof under seat port cover, and all necessary mounting hardware
A A A

Bike not listed?
Select your year and model to see all the parts that fit your bike.

  • SELECT
  • Model
Shop
  • Warranty

    1 year limited warranty – Go to www.h-d.com/warranty for full details
  • Sold in Unit

    Each
  • In The Box

    Wiring harness, rider plug-in ports, weatherproof under seat port cover, and all necessary mounting hardware
Boom! Audio Music & Comm Kit is rated 4.5 out of 5 by 11.
Rated 3 out of 5 by from It works Why so much cash for a little bit of wire and two plugs ?
Date published: 2017-04-09
Rated 4 out of 5 by from Why is this not factory installed on a FLHXS? I do not understand why this is not on a FLHXS from the factory. The left handlebar has the voice command button but there is no way to actually use it. Same as adding fog lights to a new car but expecting the buyer to come back and pay another $100 to get the switch so they can actually use the lights. I was very surprised that my Bluetooth helmet would not connect either. After extensive researched I found the only way to get this to work was installing this cable. Easy install. The removal of the white plug in the wiring harness and connecting the ground in pin 12 is a pain in the butt! Be very careful removing the plug from the harness. I suggest a paper clip or dental tool for this. I hated the HD location for mounting the 7 pin plug (on top of tank to left of console). It looks like garbage! I would expect HD to have a much better plan! After reading this review thread and several on other sites, I decided to mount on the console. It looks really nice and although a little scary, turned out to be very easy to do. Drill a pilot hole about 3/4" below wording on the console and then use a step drill bit to slowly drill out the hole until the jack fit perfectly. Suggest using a file to add a notch at the top of the hole so the jack cover fits flush and won't spin. Took me maybe an hour to complete. Works perfect.
Date published: 2017-03-31
Rated 4 out of 5 by from Useful tool Ok removing the plastic pin was a bear. I wound up cutting the wire and and soldering it and that worked out great. Also I drilled a 3/4" hole in the left side of the inner faring like the CVO style and it came out great. This item works great with the SENA Freewire and 20S.
Date published: 2017-01-16
Rated 5 out of 5 by from Boom Audio Music & Comm Kit Is A Worthwhile Investment I put this on my 2017 Street Glide and absolutely love it. This setup is the only way to use all of the features of the boom audio infotainment center. You can use voice control to make calls, change music selection and etcetera. Prior to doing this install I looked at Bluetooth options but realized that the Bluetooth options only allowed me to sync the headset to my phone, which in my view is kind of worthless. The only dislike I had, was where the instructions said to install this unit, which was on top of the fuel take. I installed mine on the left side of the inner fairing. The entire install process was very easy. All you will need is a T27 Torx and a drill with a 3/4" drill bit to install this on the inner fairing. The T27 Torx is used to remove the fairing screws, and the drill with 3/4" drill bit will be used to drill the hole in the inner fairing. Before you attempt to screw the cover onto the unit to attach it to the inner fairing, you will need to cut off a plastic tab on the underside of the cover so that it will sit flush against the inner fairing.
Date published: 2016-12-30
  • y_2018, m_2, d_26, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_en_US, sid_PA-08-69200865, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Is there a 7-pin connector for the passenger that can be added to the 2015 Street Glide Special?

Would be great to have comms for the passenger.
Asked by: HSTRY

2017 Street Glide Special, Does the dealer have to enable it?

I installed this kit and the mic works but the sound does not. Does it require a dealer update to function?
Asked by: garyOU812
Yes. They will need to use the digital technician to flash your radio.
Answered by: Pitbull1967
Date published: 2017-04-01

Need a kit for passenger

HD - please add a kit for the passenger. There was one for pre-Rushmore that I had on a previous Road Glide. It's nice to have the ability to yak with the rear seater instead of yelling or getting whomped on the back of the head...
Asked by: wenchal

How long is the cable?

Asked by: OKharley2014
It's approximately 3 1/2 feet long
Answered by: Benmac1
Date published: 2017-03-18

Passenger 7-pin DIN connector?

Have a 2016 RGS and already installed a 7-pin DIN connector for the rider to fully use the capabilities of the 6.5 inch BOOM! radio, but it occurred to me that when my wife rides with me, she has nothing to plug into. Limiting her abilities. Is there anything made and available by Harley that I can install that would work like what I find on the Ultras. In other words a passenger 7-pin for her to plug into? Pretty sure I will need the CB, and that's INWK. But...I'm certain that I would still need to install a second 7-pin somewhere on the back seat. Just cannot find anyone that's done it.
Asked by: Udine3
  • y_2018, m_2, d_26, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_19
  • loc_en_US, sid_PA-08-69200865, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Recently Viewed

    loading
    Loading...
    Please Hold Your Iron Horses

    You've been sitting idle, so we've ended your session to protect your personal details.


    Continue as guest Sign in

    You’ve been sitting idle, so your session will expire in


    Would you like to remain signed in and continue shopping?


    Yes, keep me signed in No, sign me out

    Prices listed are generally the Manufacturer's Suggested Retail Price (MSRP), excluding taxes and shipping. Prices at local dealerships may vary. All online orders will be fulfilled and shipped by
    Harley-Davidson Motor Company as the agent for the Selling Dealer.