Standard Black Forward Control Kit

Part Number 50700021


Finish / Color: Black



Add the stretched-out look and extended riding position to your Sportster® model.

  • Complete kit contains all hardware necessary to convert your Sportster® model from mid-controls to forward controls
  • Available in black finish complementing the Nightster™ model, these forward controls add style and long-range comfort
  • Footpegs and shifter peg not included

Bike not listed?
Select your year and model to see all the parts that fit your bike.

  • Model


Installation of accessory Forward Control Kits may affect cornering clearance. This could distract the rider, causing loss of control, resulting in death or serious injury.

  • Warranty

    1 year limited warranty – Go to for full details
  • Sold in Unit

  • In The Box

    Left and right brackets, shift lever, shift linkage, brake lever, brake rod and all necessary mounting hardware
  • Sold Separately

    Footpegs and shifter peg
Standard Black Forward Control Kit is rated 4.6 out of 5 by 10.
Rated 5 out of 5 by from Very comfortable and high quality Moving the mid sets to forward controls was probably the best upgrade I've done, besides exhaust, to my '17 Iron 883. It significantly increased the ride comfort and gives the rider that laid back look. Can't go wrong with these.
Date published: 2017-08-09
Rated 5 out of 5 by from Huge improvement in comfort I swapped out the mid controls on my 2017 Iron 883 with the black, standard forward control kit. It works way better for me. I'm 5'10" with a 32" inseam, so pretty average height. Even so, the forward controls are way more comfortable and still allow me to get up out of the seat for bad bumps in the road. Installation was easy and took me about 2 hours. I removed the front muffler but was able to leave the rest of the exhaust in place. I highly recommend giving these controls a try.
Date published: 2017-06-04
Rated 5 out of 5 by from Great Addition! I've made a few mods to my bike & this is one of my favorites. The riding position is much more comfortable & it was easy to install. The factory footpegs don't fit so you'll need to make sure to get the correct ones ahead of time of modify the factory ones. My local store didn't have any that fit in stock so I ended up trimming the factory pegs to fit. Outside of that, it was a great purchase.
Date published: 2017-03-19
Rated 4 out of 5 by from Nice Fit - Easy Install - be careful of footpeg clevis. I bought these Forward Controls on-line and they were delivered within a week. After removing the Exhaust they were very easy to install and the installation instructions were very clear. Pay attention to the pre-assembly prior to installing to the bike frame because the snap ring for the clevis is a little tough to put on when the mount is bolted to the frame ... but no big deal. It will also be helpful to have a snap-ring pliers. You will need new footpegs and as stated in other reviews you'll need to deal with the footpeg clevis because one side is longer than the other (see image). A standard footpeg will not work. You can easily grind down the longer clevis or you'll need to buy the Sportster 48 OEM footpeg ... and there are a few other options after market.
Date published: 2017-02-15
  • y_2018, m_2, d_26, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en_US, sid_PA-07-50700021, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Will original pegs work with this kit?

The description says footpegs and shifter peg not included. Will the original factory pegs work, or will I need to purchase pegs separately?
Asked by: Rubicon

What acessories go with this?

Will this Part Number 34689-04 fit with this control kit? Also please provide the part number for the foot pegs in the image I would like to purchase them as well!
Asked by: paulorusto

Harley iron 883N 2017 with vance hines short shots compatible?

Just wanted to confirm these will be compatible!
Asked by: paulorusto

Will this work with the stock exhaust headers?

Asked by: kevino2

Will these fit 2016 Superlow XL1200T?

Just wanted to know if these will fit my wife's 2016 Superlow 1200T with the factory stock exhaust.
Asked by: WhiskeyGlide
  • y_2018, m_2, d_26, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_en_US, sid_PA-07-50700021, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Recently Viewed

    Please Hold Your Iron Horses

    You've been sitting idle, so we've ended your session to protect your personal details.

    Continue as guest Sign in
    Online Exclusives

    You’ve been sitting idle, so your session will expire in

    Would you like to remain signed in and continue shopping?

    Yes, keep me signed in No, sign me out

    Prices listed are generally the Manufacturer's Suggested Retail Price (MSRP), excluding taxes and shipping. Prices at local dealerships may vary. All online orders will be fulfilled and shipped by
    Harley-Davidson Motor Company as the agent for the Selling Dealer.