Free Shipping with $50 Purchase + Free Returns

Batwing Chizeled Handlebar - Chrome

Part Number 55800298

FINAL SALE, NON-RETURNABLE

Finish / Color: Chrome

Quantity:

A A A

Bring cutting edge style to your custom bagger. The Batwing Chizeled Bar combines the rise of a 12"mini-ape with the edgy profile of the classic Z bar and the wrist position of a drag bar. The result? An aggressive hands-in-the-air riding posture.

  • Chrome finish
  • Fat 1.25" bar replaces mitered and welded corners with cast seamless 90° bends for added strength and style
  • Cast elbows eliminate sharp internal bends to simplify internal wiring
  • See Guides tab for additional components required for installation
A A A

Bike not listed?
Select your year and model to see all the parts that fit your bike.

  • SELECT
  • Model
Shop
A A A

Note

Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake lines for some models. Handlebar height is regulated in many locations. Check local laws to ensure your motorcycle meets applicable regulations.

  • Material Content

    Steel
  • Material Diameter

    1.25 Inch
  • Tip-to-Tip

    35.25 Inch
  • Base Width

    16.0 Inch
  • Knurl Center-to-Center

    3.50 Inch
  • Rise

    12.0 Inch
  • Pullback

    5.25 Inch
  • Warranty

    1 year limited warranty – Go to www.h-d.com/warranty for full details
  • Sold in Unit

    Each
  • In The Box

    Handlebar only
Batwing Chizeled Handlebar is rated 2.2 out of 5 by 6.
Rated 4 out of 5 by from Should have went taller After reading the reviews, I think it's time for a positive one. I like the bars, just think I should have went with 14" or taller. I'm 6'1 so the bar is pushed all the way up. I've put somewhere around 1,000 miles since I put the bars on. The only thing I noticed is my had falls a sleep. I don't wear gloves but when I wear gloves the hand stays awake. I've done at least 2 300 mile days and can't complain.
Date published: 2017-06-08
Rated 1 out of 5 by from case of the numb hands I bought these batwing chizeled bars on black Friday and got a hell of a deal. They look really nice but too bad my wrists start to hurt and hands go numb even on short rides. I don't even have them pulled back like some say on the other reviews which make the angle worse.
Date published: 2017-04-01
Rated 2 out of 5 by from Uncomfortable I'm 6'5", was looking for more comfortable hand placement with my height. Put these bars on my 2016 Street Glide. They looked great and are not bad for short rides. however they are extremely uncomfortable for rides 1 hour or more. The angle puts a lot of pressure on your wrist. to take pressure off wrist i find myself with a relaxed grip of only index and middle finger. All in all, I would recommend these for short rides or a show...
Date published: 2017-02-16
Rated 2 out of 5 by from Cant have your cake and eat it too! Put these bars on my 2016 Street Glide. They made the bike look bada$$ however it was extremely uncomfortable for long rides. I'll admit, I am shorter so I had to have the bars angled down more which created a weird angle on my wrist. If they were straight up that might be better but they would be a very far reach and make turning a nightmare. They do look good but try a bike with them first before shelling out close to $1600 for a dealer install to just be uncomfortable on a touring bike! Guess I couldnt have my cake and eat it too.
Date published: 2017-01-15
  • y_2018, m_2, d_26, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_PA-09-55800298, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Will these fit on a 2012 Streetglide?R

Asked by: Shelby18
Hi Shelby18, No, this Batwing Chizeled Handlebar will not fit a 2012 FLHX, it fits '14-later Electra Glide® and Street Glide® models. Thank you for your question.
Answered by: FXS78
Date published: 2015-11-23

Is there a way to use these bars with heated grips?

I want to get these bars on my 2015 Ultra Limited, but I have heated grips. Need to know if there is any way to make them work with heated grips.
Asked by: Steveo0429
Just picked up my bike today heated grips does fit these bars 2014 street glide
Answered by: tyronej9700
Date published: 2017-12-31

Wich wire extensions (part no#) are needed to install handlebar on a FLXHS '14

Asked by: Chiel
Hi Chiel, The part number for the Batwing Chizeled Handlebar Switch Wire Extensions is 69200034. Thank you for your question.
Answered by: FXS78
Date published: 2015-10-01

Why will the Batwing Mini-Ape Handlebar P/N 57474-11 fit 09 thru 2016 batwing bikes and Batwing Chizeled Handlebar P/N 55800298 not fit 09 thru 2013

Compared side by side wiring holes are in the same places, Knurl same size. ?????
Asked by: bdsimmons98

Why will these not fit the 2009 thru 2013 Batwing bikes?

Asked by: bdsimmons98
Hi Bdsimmons98, The Batwing Chizeled Handlebar won't fit '09-'13 Batwing bikes because of various changes that were done during Project Rushmore, such as the chassis and wiring. Thank you for your question.
Answered by: FXS78
Date published: 2016-10-29
  • y_2018, m_2, d_26, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_US, sid_PA-09-55800298, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Recently Viewed

    loading
    Loading...
    Please Hold Your Iron Horses

    You've been sitting idle, so we've ended your session to protect your personal details.


    Continue as guest Sign in

    You’ve been sitting idle, so your session will expire in


    Would you like to remain signed in and continue shopping?


    Yes, keep me signed in No, sign me out

    Prices listed are generally the Manufacturer's Suggested Retail Price (MSRP), excluding taxes and shipping. Prices at local dealerships may vary. All online orders will be fulfilled and shipped by
    Harley-Davidson Motor Company as the agent for the Selling Dealer.