Auxiliary Accessory Switch Housing Kit

Part Number 70248-02B


Finish / Color: Black



Keep your eyes on the road and your hands on the grips with this easy-to-reach Auxiliary Accessory Switch Housing.

  • For left side controls
  • Allows you to install up to 3 switches to control various electrical devices
  • Black finish matches Original Equipment switch housings
  • Switches sold separately
  • Included all necessary mounting hardware

Fits '96-later VRSC™, XL, XR, Dyna®, Softail® (except FLSB, FLSTF, FLSTFB, FLSTFBS, FXDRS, FXSB and FXSE), and Touring models (except '15-later Road Glide® and FLHRXS). Does not fit models equipped with Large Diameter Handlebars, Boom!™ Audio Cruiser Amp & Speaker Kits or Tour-Pak® Mounted CD Changer P/N 77184-01. '04-later XL and XR models require separate purchase of (2) Screw P/N 3832M.

Bike not listed?
Select your year and model to see all the parts that fit your bike.

  • Model
  • Side of Bike

  • Warranty

    1 year limited warranty – Go to for full details
  • Sold in Unit

  • In The Box

    All necessary mounting hardware
  • Sold Separately

    Switches. Click the Fitment tab above for details
Auxiliary Accessory Switch Housing Kit is rated 4.0 out of 5 by 7.
Rated 5 out of 5 by from Great products for adding accent lights and keeping factory looks So this is great except for the part where you read the instructions and it says you also need part #3832M which is just two screws yeah lame and annoying. Also I wanted the right side in black but when you read the description it says that you can only get the left in black so that’s what I got. Well again you look through the instructions and they do have the right says in black so if that’s what you are looking for it is part #70256-02A. Still happy still looks great got the factory look I wanted which was more important than left rather than right.
Date published: 2018-02-16
Rated 4 out of 5 by from Mostly excellent I ordered this for three purposes: 1. To put a hard switch in place for the LED lights I added 2. To relocate the "passing lamp" switch (behind the forks) to something more hands friendly. 3. To have an additional switch available. This switch definitely accomplished that purpose, and as there are three switch slots, I have room for another. This requires you to buy the switches separately. ($17/each) It seems that at least one should come with it, but I guess you could be replacing the housing and already have switches. The unit arrives with covers for two slots, as you will clearly be installing at least one switch. I don't understand why, but you can get the chrome in both left and right sides, but the black only comes for the left. This was fine, as was what I needed, but I wouldn't be able to add any additional. They provide a wire sheath for you to run the pair of wires from the switch through for a cleaner look. You cannot push the whole thing through, don't try. I ended up using a stiffer, solid core wire, attaching to the switch wire pair and then pulling it back through. The sheath wire is long and you will not be able to just run it through without a helper. Plus, the switch packaging has the sheath all folded up, which makes it more difficult. (That's not THIS product, but you'll be buying it.) The instructions aren't as clear as they could be, that's for certain. As best I can remember from installing it, there's no mention that the little "T" tabs on the flat metal piece with the holes should be bent over the switches to hold them in place. Took me quite a while to understand that was how you get the switches to NOT fall out of place as you are trying to mount to the bike. Overall, definitely something I would buy again if needed. For my install, with the main switch bundle for the blinker, horn, etc. along with three more bundles, one from each switch, I really need to take those FOUR wiring groups and wrap them into a larger solid one. Looks like an octopus attached to my left handle bar.
Date published: 2017-09-14
Rated 5 out of 5 by from Great addition for accessories I ordered the switch housing with two switches, one to replace the driving light toggle switch and the other one for my Love Jugs fans for my Heritage Softail Classic. Great product and looks like it came this way from Harley-Davidson. Now I can run everything with my thumb. Easy installation and great service. I just dipped the ends of the wires in petroleum jelly before running them through the tubes and went in good. I still have room for another switch when I need it.
Date published: 2017-01-30
Rated 1 out of 5 by from Product does not include all necessary mounting hardware. I ordered this at my dealer after reading the description online. Online description states, "All necessary mounting hardware is included " I go out to the dealer to pick it up, get home and start to read the instructions, and it says, "2004 and later XL models require separate purchase of two screws, Harley-Davidson part number 3832M". So, apparently all the necessary mounting hardware is not included. Now I need to make two more trips, one to order the screws #because that's not allowed over the phone, and those parts aren't available online#, and then another to pick them up, before I can install this. And, these are only $.52 screws. So it was too much to ask to have them included in the kit that claims all mounting hardware included.
Date published: 2015-10-02
  • y_2018, m_2, d_26, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_PA-09-7024802B, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson


Will this fit a "1-1/4" diameter bar? I have some West Coast T-Bars on my ride and am interested in this switch housing. Thanks!
Asked by: Mark2286
I really don't think so. These are made for 1" bars and fit that really good. It screws to the existing clutch bracket. You may be able to grind it out and modify it to fit but keep in mind, if you mess it up, I'm sure they won't take it back.
Answered by: PYHeritage
Date published: 2017-05-13

I'm looking for a rocker switch for this housing

I've ordered the aforementioned 71718-02 Auxiliary Switch Kit. It is On/Off which is perfect for my LED setup. I'd like something appropriate for a garage door opener, a switch that won't stay on. It is the "momentary switch" that was asked before. I'd also like a momentary switch to operate an air ride suspension. Does Harley make a switch other than the Stay On Stay Off type?
Asked by: primeral
I haven't seen a Harley momentary switch, but you can mount any push-button switch onto the gap filler blocks easily enough. There's plenty of space in the housing to set up your own connection back there.
Answered by: AlexK
Date published: 2015-10-28

Says it fits 96 & later VRSC. Will it fit 2014 F (Muscle) with stock handlebars?

Asked by: Cee24
Hello Cee24, Yes, this will fit your 2014 VRSCF. Thank You!
Answered by: JD34
Date published: 2015-04-22

Is a 'momentary on' switch available for this housing?

Can't use HD garage opener on community gate as I can't install receiver on gate.
Asked by: Burnsie
Hello Burnsie, I'm not exactly sure what you are looking for your switch to do, but we do offer an Auxiliary ON/OFF switch for that housing. The part number is PN 71718-02. Thank You!
Answered by: JD34
Date published: 2015-04-02

What parts go with this?

Do you sell the internal switches for part #70248-02B (Aux. Accessory Switch Housing). If so what is the part number?
Asked by: takedown33
We have an Auxiliary On/Off Swtich kit, P/N 71718-02, that you can then hook up to whatever extra components you want to install. I've added it below for you to take a look at.
Answered by: RockyXL883
Date published: 2014-09-04
  • y_2018, m_2, d_26, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_PA-09-7024802B, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Recently Viewed

    Please Hold Your Iron Horses

    You've been sitting idle, so we've ended your session to protect your personal details.

    Continue as guest Sign in
    Online Exclusives

    You’ve been sitting idle, so your session will expire in

    Would you like to remain signed in and continue shopping?

    Yes, keep me signed in No, sign me out

    Prices listed are generally the Manufacturer's Suggested Retail Price (MSRP), excluding taxes and shipping. Prices at local dealerships may vary. All online orders will be fulfilled and shipped by
    Harley-Davidson Motor Company as the agent for the Selling Dealer.