Rated 5 out of 5 by 2
Rated 5 out of 5 by Erkk Lihhts
Excellent turn signals were done and working in 30 minutes nice thank you
May 8, 2016
Rated 5 out of 5 by abowie Nice Product
I installed these on my 2012 fatboy Lo. End Result the kit looks and works great ! A couple of snags that you may encounter. The hardware stack up in the instructions is a little unclear. I went to harley and looked at a new Heritage Softail, as these are stock on the heritage. Under your passing lamp you've got a thick beveled spacer and then a thin one, then the passing lamp bracket, then you should only have the small beveled spacer then the signal mount bracket. Also the nut harley supplies to attach the signal mount bracket is too thick and you cannot run it down enough to even engage the nylon locking portion. I went to Ace hardware and got thinner jam nuts and used them with lock washers. Lastly the AMP Multilock Plastic connector supplied with the kit will work well but I had to fight with it to get the pins to seat in the plug. If your having trouble with the wiring, at least on my 2012 fatboy lo, the wire placement is as follows: RH signal wires start at the top of the plug and are Black, Purple, Blue then the left signal Blue, Purple, Black. In case your bike is different the instructions tell you what the colored wires on the bike do, the wires on this turn signal kit are black, purple and blue. The black wires are ground, the purple wires are the turn signal feed, and the blue wires are the running light feed. I hope this helps......
March 24, 2014