Free Shipping with $50 Purchase + Free Returns

Tour-Pak Side Marker Light Kit

Part Number 54352-09




This wrap-around smoked lens Side Marker Light Kit adds a splash of light to the lower edge of the Tour-Pak® luggage system. Kit replaces the chrome side trim along the lower edge of the Tour-Pak® on Electra Glide® Classic models, or replaces the Original Equipment red lens featured on Ultra Classic® Electra Glide® and Tri Glide™ models.

  • Smoked lens
  • Replaces the chrome side trim along the lower edge of the Electra Glide® Classic Tour-Pak®
  • Remains stealthy while ignition is off, but glows red when the lights are switched on
  • Includes left and right red lens housing, wiring harness, and all required installation hardware

Fits '06-later Touring and Trike models equipped with King Tour-Pak® luggage.

Bike not listed?
Select your year and model to see all the parts that fit your bike.

  • Model
  • Lighting Type

  • Lighting Color

  • Lens Color

  • Warranty

    1 year limited warranty – Go to for full details
  • Sold in Unit

  • In The Box

    Left and right smoked lens housings, wiring harness and all required installation hardware
Tour-Pak Side Marker Light Kit is rated 5.0 out of 5 by 3.
Rated 5 out of 5 by from Smoked lens Side Marker Did it for the looks. Easy to install/change out.
Date published: 2017-03-08
Rated 5 out of 5 by from Great upgrade Looks great over the chrome piece and the LEDs are really bright. Nice upgrade.
Date published: 2016-04-05
Rated 5 out of 5 by from Great Look Easy fast install requires zero skill. Great improvement over the red lights on my 2014 EGUC. If you already have the red lights on your bike this is simple plug and play.
Date published: 2016-03-09
  • y_2017, m_3, d_21, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_PA-11-5435209, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Will it fit a 2016 FLHR with King Tour-Pak?

Asked by: HwyFuzz
Hi HwyFuzz, Okay, The Tour-Pak Marker Light Kit will fit '06-later Touring and Trike models; however, it does not fit the Road King. Thanks!
Answered by: RowdyGrl79
Date published: 2016-06-08

will these fit the chopped tour pack

Asked by: rstreetman221
Hi Rstreetman221, No, this Tour-Pak Side Marker Light Kit will not fit a Chopped Tour-Pak. It fits '06-later Touring and Trike models equipped with King Tour-Pak® luggage. Thank you for your question.
Answered by: FXS78
Date published: 2016-04-12

Does this fit a 2016 FLTRU?

Does this fit a 2016 FLTRU?
Asked by: RGS71
Yes, this will fit the '16 FLTRU since it has the same King Tour-Pak as the Ultra and the Limited. Looks like it might have gotten missed in the 2016 Year drop down. We'll make sure that this gets fixed!
Answered by: Rockstar883
Date published: 2015-09-22

I'd like to replace the red lens light on my 2014 FLHTK with the smoked lens kit. Can these lights be configured to act as a side turn signal as well?

Am I correct in assuming that I will not need the wiring harness since I already have lamps on my King tour pak?
Asked by: GtownBigT
Hi GtownBigT, These were not designed to work as turn signals so we can not assist with that. I do think that would be a neat idea as I am all for being seen more. It's possible if you already have lamps there you may not need the wiring harness, but I can't say I'm 100% sure on that. Regardless, the kit comes with the harness in case you do need it.
Answered by: PeteHD
Date published: 2014-10-31

How to wire into FLTR Removable Tour Pak with Rear LED Smoked Light Kit.

I just installed the rear Smoke LED light kit on a 2007 FLTR. Is there a wiring kit needed to add the side marker smoked LED's to allow the side marker led's to also provide run and turn signal as do the new LED's on the rear of the tour pak? Since this is a removable tour pak the wiring as would be provided on a fixed Ultra Classic is not provided in the tour pak. So can the new corner markers be added to the new LED's on the rear with splicing into the wiring? Is there a Y barnes available to connect with the corner LED's?
Asked by: Ron2203
  • y_2017, m_3, d_21, h_14CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_PA-11-5435209, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

You Might Also Like

Recently Viewed

    Please Hold Your Iron Horses
    Learn how to check store availability


    You’ve been sitting idle, so your session will expire in  minutes.

    Would you like to remain signed in and continue shopping?

    Yes, keep me signed in No, sign me out

    Prices listed are generally the Manufacturer's Suggested Retail Price (MSRP), excluding taxes and shipping. Prices at local dealerships may vary. All online orders will be fulfilled and shipped by
    Harley-Davidson Motor Company as the agent for the Selling Dealer.