Rated 4.5 out of 5 by 2
Rated 4 out of 5 by MarcM Switch housing
These are a difficult install solely for the reason of getting the both throttle cables out of the factory housing then into the chrome housing.
I filed down a glasses screwdriver on a bench grinder to make it "sharp/thin/flat" enough to slide into the ring around the cable itself. I am sure there is a tool for this but I didn't have it (obviously).
Overall installation took almost an hour just due to this.
Be prepared to adjust your throttle and decel when doing so. You need to be able to hear the butterfly valve hit the throttle body when fully open and quickly return to fully closed as needed with your bars in a full right, left and straight fashion.
Recommend switching your buttons and grips and do them all at once. Plan on 2 patient hours if you work slow and meticulously.
Once installed they look phenomenal.
April 26, 2015
Rated 5 out of 5 by Greg73 LOVE THEM
Looks great! would recommend taking to shop for install. Switches going back in can be a pain. Had to take mine to shop for repair after damaging switch. Lesson learned
July 14, 2014