Free Shipping and Returns to your local dealer Details

Sport Windshield Kit

Part Number 58192-87A

Quantity:

In Stock Online

A A A

Dress up or down with the convenience of a Detachable Windshield. This compact-style windshield is designed to fit models equipped with Auxiliary Lighting Kits.

  • 18" Light Smoke windshield
  • Hard-coated to resist scratching
  • Adjustable four-point mounting
  • Helps deflect wind to reduce upper body fatigue
A A A

Fits '88-later XL (except XL883C, XL1200C, XL1200CX, XL1200T and XL1200X and '11-later XL883L) and '95-'05 Dyna models (except FXDWG and FXDXT). Includes black mounting hardware. Windshield dimensions: Overall height - 18.5"; width - 16.3".

Bike not listed?
Select your year and model to see all the parts that fit your bike.

Shop
  • Tint
    Light Smoke
  • Material Content
    Hard-coated Polycarbonate
  • Material Width
    16.30 Inch
  • Windshield Height above Headlamp
    17.0 Inch
  • Windshield Overall Height
    18.50 Inch
  • Warranty
    1 year limited warranty - See Customer Service section for details
  • Sold in Unit
    Each
  • In The Box
    Complete windshield with all mounting hardware
Rated 3.7 out of 5 by 11 reviewers.
Rated 4 out of 5 by Good Windshield for the Price I find this windshield to be a good fit, and I like the sleek look it adds to the sportster. Large enough to keep the bugs off of you, yet small enough to still feel the wind on your face. The only downfall I have with it, is wishing it was just a bit wider. I found no issue with putting it on, as long as you follow the instructions. October 14, 2015
Rated 5 out of 5 by This windshield was just what I wanted I like the look of the smaller windshield for the sportster. Makes a big difference in my ride now since we have an excessive amount of bugs where we ride. September 20, 2015
Rated 4 out of 5 by It works It was hard to install so it looked ok, It does what it is suppose to do. I am glad I installed it. Next time I am going to go with one that is easy to remove. August 18, 2015
Rated 1 out of 5 by Worst Install Instructions & Hardware Package EVER!!! Put this on my 2014 Iron 883. The hardware package is terrible. The upper metal clamps are too tight to fit on properly which lead to scratching the H$LL outta my nice black handlebars. Plus the brake reservoir & brake cable interfere with the RH side clamp mounting. The lower metal clamps / holes don't line up after you bend them open to get around your forks - then TRY to re-close with your hands (good luck!). The lower windshield mounting holes then also don't line up well at all with the lower fork clamp bracket holes - you have to put pressure on the windshield to make is assemble BUT what makes that worse is that they give you NYLON SCREWS to hold it!!! REALLY!! WTF!!! Sure they give you an extra in the package because they know you're going to break one (if you're lucky at just one)! GO AFTERMARKET!!! At least maybe they've actually put some thought in their design... SO DISAPPOINTED!!! July 30, 2015
  • 2016-08-26 T11:06:44.728-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_11, tr_11
  • loc_en_US, sid_PA-20-5819287A, prod, sort_default
2 3 next>>
Ask your questions. Share your answers.
3 Questions | 3 Answers

Product Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
I don't want anything too big but I don't want a simple fairing around my light. My speedometer is in the center on top of my handlebars. It is proving difficult to find a windshield for my bike that I like and that fits.

Thank you

I included a picture. Mine is the center one.
User submitted photo
March 5, 2015
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Ashley0917 is loaded.
Additional information about Ashley0917 could not be loaded.
Hickory, NC
I Ride: 2000 Sportster XL883
How I Ride: Local - Solo
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi Ashley0917,

By looking at the picture, and seeing the position of the speedometer, we can not determine what windshields may fit your bike. Please visit your local dealership for fitment assistance.

Thank you for your question.
March 10, 2015
Customer avatar
by
Read all my Q&A
 
Please wait while more information about FXS78 is loaded.
Additional information about FXS78 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
 
1 answer

regarding mounting instructions

your picture show fork angle brackets point "IN", the instructions say to point "OUT".

your instructions says to mount handle bar U brackets on vertical segment of handle bars - your picture show mounted on horizontal segment.

What is the correct way to mount the windshield - i have stock 92 dyna datona.
September 7, 2013
Customer avatar
by
Read all my Q&A
 
Please wait while more information about emiddio is loaded.
Additional information about emiddio could not be loaded.
snohomish, wa
I Ride: 92 dyna datona - stock
How I Ride: Local - Solo
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
These are the correct instructions for the install:

1. Support windshield on a non-abrasive
surface and push an upright into each socket. DO NOT
USE OIL, GREASE, OR SILICONE. Use water or saliva
as a lubricant.
2. Place “U” clamp around vertical segment
of handlebar with open side of “U” clamp facing
generally forward. Put cup spacer and internal lock
washer on eyebolt. Slip eyebolt through bottom of “U”
clamp from outside of handlebar. At the same time
insert two beveled washers into eyebolt inside “U”
clamp (bevels toward each other), one on each side of
handlebar. Start whizlok nuts on eye-bolt, but do not
tighten.
3. Spread the fork clamps and place around
the top of the fork tubes so the flat side is to the outside
and pointing forward, squeeze the clamps tight on the
forks. Bolt the angle brackets to the fork clamps with the
button hex screws and flat washers. The ends of the
angle brackets will point out. Do not fully tighten the
screws.
4. See Figure 4. Slip upright into eyebolt “eyes” and
tighten the nuts on the eyebolts until snug. Assemble
the lower mounts in the following order (front to rear):
nylon screw, dished washer, flat washer, rubber
bushing, windshield, rubber bushing, flat washer, angle
bracket, whizlok nut.
5. Align shield for the desired angle and center it side to
side. The gasket should rest on the headlight cover.
Tighten the hardware in the following order: eyebolts,
nylon screws, then the fork clamp bolts. Install snap
caps over nylon screws
September 11, 2013
Customer avatar
by
Read all my Q&A
 
Please wait while more information about RockyXL883 is loaded.
Additional information about RockyXL883 could not be loaded.
Milwaukee, WI, USA
How I Ride: Local - Solo
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
June 8, 2013
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Joe422 is loaded.
Additional information about Joe422 could not be loaded.
scotrun, PA
I Ride: sportster
How I Ride: Touring - Solo
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hey Joe422. The quick release clamps won't work with the Sport Windshield P/N 58192-87A but it will work with P/N 57838-08. I've added the picture below for you to check out.
 
Products related to my answer
 
June 26, 2013
Customer avatar
by
Read all my Q&A
 
Please wait while more information about RockyXL883 is loaded.
Additional information about RockyXL883 could not be loaded.
Milwaukee, WI, USA
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
  • 2016-08-26 T11:06:33.548-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_PA-20-5819287A, prod, sort_default
1 of 1
  • 2016-08-26 T11:06:33.549-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_PA-20-5819287A, prod, sort_default
1 of 1
Ride Free. Ship Free. Return Free.

FREE SHIPPING AND RETURNS TO YOUR LOCAL DEALER. DETAILS

You Might Also Like

Recently Viewed


    Prices listed are generally the Manufacturer's Suggested Retail Price (MSRP), excluding taxes and shipping. Prices at local dealerships may vary. All online orders will be fulfilled and shipped by
    Harley-Davidson Motor Company as the agent for the Selling Dealer.