Free Shipping and Returns to your local dealer Details

Screamin' Eagle Street Performance Tuner Kit-41000008B

Part Number 41000008B

Quantity:

In Stock Online

A A A

The Screamin' Eagle® Street Performance Tuner is designed to simplify management of street-legal performance calibrations as EPA-compliant performance modifications are made. It easily allows the rider or technician to view and evaluate engine operating parameters.

  • Upload the calibration that provides the best performance mix for your mufflers
  • Add a Big Bore Stage I or Stage II kit later, and simply download the proper ECM calibration to match the model and hardware
  • Kit includes Vehicle Communications Interface module with on-board memory to record up to 15 minutes of run-time data
  • Module will store information on up to 27 variables that can be downloaded to your PC via an optional USB cable (sold separately)
  • Ability to view the bike's air/fuel ratio, O2 sensor readings, engine speed and temperature, RPM and vehicle speed, throttle position, spark advance and much more
  • Online access to the latest factory calibrations, so you can load the most up-to-date parameters whenever you have your bike serviced
  • Software download and updates can be found at –
    www.h-d.com/streetperformancetuner
A A A

For use with '14-later XL and '07-later EFI Dyna®, Softail® and Touring models.

Bike not listed?
Select your year and model to see all the parts that fit your bike.

Shop
A A A
  • These Screamin' Eagle® products are 50-state street-legal for sale and use on all vehicles, including those that are pollution controlled. Complies with the requirements of 40 CFR Part 86, subparts E and F.

Note

Street Tuner permits limited tunability within the emissions range to optimize drivability without compromising emission levels. It also features expanded tuning options outside the emissions range to optimize performance.

  • Warranty
    1 year limited warranty - See Customer Service section for details
  • Sold in Unit
    Each
  • In The Box
    Tuner VCI module and software
  • Sold Separately
    Tuner Cable Kit
Rated 2.7 out of 5 by 12 reviewers.
Rated 1 out of 5 by mistake I bought a 117 big bore kit, very nice kit by the way. Went to in stall a new map. This tuner had the program but not the software to install it. I am 100 miles away from a dealer . Now I have to tow the bike to the dealer and be at there mercy. I blame hd not the dealer. Should have done what it is stated to do .They got me May 15, 2016
Rated 1 out of 5 by not enough fuel adjustment for the screaming eagle cams and exhaust when I ordered the tuner I didn't see where this had a very limited fuel adjustment and no other adjustments are tuneable at all. had to buy the super tuner from dealer at twice the price. I sure would like to be able to return but =don't see who to call for returns since I got it on line. very dissappointed April 22, 2016
Rated 2 out of 5 by Poor fuel map support I hate leaving reviews like this but I bought this tuner along with a SE air cleaner and exhaust. Installation went well on all but when I fired up the program for the first time and ensured the program was up to date I realized the fuel maps provided are are over the place with no logical flow. This product does not support a Stage 1 w/ high flow exhaust (a specific map to ask for in the drop down menus)...the basic upgrade most riders make for my model (2012 FLHTK). Guess I will have to go to the dealer and pay them to tune the bike... At least I have a way to read trouble codes now. March 22, 2016
Rated 1 out of 5 by Not worth the money Purchased this based on recommendations from the local dealership device counter after I installed V&H slip on mufflers and K&N air cleaner. Hoping to reduce deceleration popping and backfire I flashed a stage one and then stage two file but still too lean. The unit only flashes EPA approved settings which are too lean. At least the cable kit I had to buy works on the TTS programmer I have now. After one reflash with stage one TTS there is no more popping or backfire and it runs great. Don't waist your $$ on the street performance model. December 25, 2015
  • 2016-07-22 T07:50:02.800-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_12, tr_12
  • loc_en_US, sid_PA-06-41000008B, prod, sort_default
2 3 next>>
Ask your questions. Share your answers.
53 Questions | 40 Answers

Product Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
Replaced plugs and messed up the gap on the old plugs. Have V&H pipes SE Tuner and high flow air cleaner. Trying to replace plugs and need to gap them.

Thanks
July 9, 2016
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Wallydog is loaded.
Additional information about Wallydog could not be loaded.
Houston Tx
I Ride: 2007 Dyna Lowrider
How I Ride: Local - Solo
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
As far as I know it does not change your plug gap. If you have other equipment on the bike that requires you to change the spark plug gap. Maybe this tunner is not the right one for you. You may need the Pro Tunner or other.
July 10, 2016
Customer avatar
by
Read all my Q&A
 
Please wait while more information about MichaelF is loaded.
Additional information about MichaelF could not be loaded.
Klamath Falls, OR
How I Ride: Touring - Solo
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
April 26, 2016
Customer avatar
by
Read all my Q&A
 
Please wait while more information about grubby is loaded.
Additional information about grubby could not be loaded.
Baldwin, Fl
I Ride: 2016 FLSS
How I Ride: Touring - Solo
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Yes, HD only test using their systems. But they will work with other like products.
April 27, 2016
Customer avatar
by
Read all my Q&A
 
Please wait while more information about MichaelF is loaded.
Additional information about MichaelF could not be loaded.
Klamath Falls, OR
How I Ride: Touring - Solo
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
0 answers

Used purchase

I purchased a 2013 Heritage. The tuner was a part of the deal, and is 'married' to the bike. The problem is that I cannot download the software, based on the # of the back of the unit. Is there any other available way to download the software???
Thanks!
April 21, 2016
Customer avatar
by
Read all my Q&A
 
Please wait while more information about TJack is loaded.
Additional information about TJack could not be loaded.
Staten Island, NY
I Ride: 2013 Heritage
How I Ride: Touring - With Passenger
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

Multiple bikes?

Can I use this on both of my Harleys? Do I have to buy one for each bike?
April 5, 2016
Customer avatar
by
Read all my Q&A
 
Please wait while more information about kd0ftc is loaded.
Additional information about kd0ftc could not be loaded.
Grand Junction, CO
I Ride: 2015 Fat Bobs
How I Ride: Local - With Passenger
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
You can only use it for the first bike you set it up with. (for life)
April 8, 2016
Customer avatar
by
Read all my Q&A
 
Please wait while more information about MichaelF is loaded.
Additional information about MichaelF could not be loaded.
Klamath Falls, OR
How I Ride: Touring - Solo
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

Answer: 
Short answer...no. Long answer, once you hook up the unit to a bike it will marry itself to that bike. Full functionality will only be available with the first bike you connected it to. You will still be able to read trouble codes when you connect to your second bike. Hope this helps.
April 8, 2016
Customer avatar
by
Read all my Q&A
 
Please wait while more information about midmo is loaded.
Additional information about midmo could not be loaded.
Warrensburg, MO
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1
Has staff answer
 
1 answer

Map requests

How does one request a new baseline map? I have a 2012 FLHTK and installed a SE Ventilator air cleaner and the SE high flow exhaust w/ street cannons planning to flash the ECM with the SESPT. Currently, there isn't a map available for Stage 1 w/ High Flow exhaust; seems like it would be a standard map but it isn't. Is it available online somewhere? Thank you.
March 20, 2016
Customer avatar
by
Read all my Q&A
 
Please wait while more information about midmo is loaded.
Additional information about midmo could not be loaded.
Warrensburg, MO
I Ride: 2012 FLHTK
How I Ride: Touring - Solo
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hey midmo,

All updated info for S.E. tuning would be at:

http://streetperformancetuner.harle...
March 21, 2016
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Rockstar883 is loaded.
Additional information about Rockstar883 could not be loaded.
Milwaukee, WI
How I Ride: Local - Solo
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
  • 2016-07-22 T07:48:44.759-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_PA-06-41000008B, prod, sort_default
2 3 next>>
  • 2016-07-22 T07:48:44.762-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_PA-06-41000008B, prod, sort_default
2 3 next>>
Ride Free. Ship Free. Return Free.

FREE SHIPPING AND RETURNS TO YOUR LOCAL DEALER. DETAILS

You Might Also Like

Recently Viewed


    Prices listed are generally the Manufacturer's Suggested Retail Price (MSRP), excluding taxes and shipping. Prices at local dealerships may vary. All online orders will be fulfilled and shipped by
    Harley-Davidson Motor Company as the agent for the Selling Dealer.