Rated 4.5 out of 5 by 6
Rated 5 out of 5 by JustRide19 Nice Upgrade
Overall, I'm happy with this product. As some of the previous comments on here indicate, your knee will probably hit it but mine did with the stock one as well. No notable difference for me. I also would highly recommend getting the throttle body cover (PN 61300109 - Chrome or 61300110 - Black) to complete it. If you're spending $375.00 on this part, what's $60 more?
The install...not bad. However, if you go to the install instructions it says you have to remove and discard the induction module bracket. I just took my tank off to get the top 2 screws out. Tank removal is super easy and probably faster than fighting another way to remove these screws. The instructions never mention anything about that hardware again but I put those top 2 screws back in. They have to go back in BEFORE any other steps or you'll have to take every back off again since there is no way to get those back in.
As with majority of Harley instructions, they try to make it sound all high-tech to scare you away from doing the install yourself. As long as you look at figure 3, lube the O-rings and use Loctite on the bolts as stated it's a breeze.
I have the Vance and Hines FuelPak3, so no ECM recalibration was required since I just loaded a map to fit my 2015 Street Glide Special.
May 26, 2016
Rated 4 out of 5 by Elduderino506 Burst air cleaner
This does stick out quite a bit and there is a little noise, but not annoyingly loud. There's definitely a noticeable improvement in the low and mid range. This air cleaner does require a computer flash and there's a notice in the box that says if it's not installed by dealer it may void your warranty
May 14, 2016
Rated 4 out of 5 by iverr6 Burst Air Cleaner
I put this on my '16 Softail Slim with the calibration download, and as of right now the stock exhaust. It looks really nice, one of the nicest AC's in the HD product line I think. I didn't notice much of an increase in intake noise, but did notice a boost in performance right off. My only complaint is that it sticks out quite a bit and your leg will be hitting it. Also I recommend the throttle body cover for injected bike cause it will be exposed.
February 12, 2016
Rated 5 out of 5 by Eric023 Looks good, better breathing
I was looking to upgrade the intake on my '14 FLHXS, and already having the "Burst" derby cover this seemed like a good choice to continue that line.Install was easy for anyone mechanically inclined.I also recalibrated the ECM as recommended.There was definitely a noticeable improvement in performance. One feature not mentioned is that the backing plate is polished on the opposite side if you prefer that to the brushed aluminum.Be aware that intake noise is much increased over the stock setup, and I agree with the previous reviewer that it does stick out against your leg more.
June 24, 2015