Free Shipping with $50 Purchase + Free Returns

Mini-Ape Handlebar

Part Number 56079-93T


Finish / Color: Chrome



Raise your fists to the wind with this 1" diameter Mini Ape handlebar.

  • Features a conservative rise and bend for rider comfort
  • Chrome finish complements the aggressive look of the Nightster™ and Street Bob® models
  • See More Info tab for additional components required for installation

Fits '07-later XL883L, XL883N, XL1200CX, XL1200L, XL1200N, XL1200T, XL1200V and XL1200X models. Also fits '06-later FXDB and '96-'05 FXDWG models with Original Equipment handlebar P/N 58079-93. XL models require separate purchase of additional components.

Bike not listed?
Select your year and model to see all the parts that fit your bike.

  • Model


Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake line for some models. Handlebar height is regulated in many states. Check state or local laws before installation.

  • Material Content

    Stainless steel
  • Material Diameter

    1.0 Inch
  • Tip-to-Tip

    32.0 Inch
  • Base Width

    10.0 Inch
  • Knurl Center-to-Center

    8.75 Inch
  • Rise

    8.75 Inch
  • Pullback

    6.50 Inch
  • Warranty

    1 year limited warranty – Go to for full details
  • Sold in Unit

  • In The Box

    Handlebar only
  • Sold Separately

    Additional installation components
Mini-Ape Handlebar is rated 4.8 out of 5 by 5.
Rated 4 out of 5 by from mini ape Was a whole lot better than stock i ride a sporty 1200t i am 5"8 would have got 5 stars except that to be level with my shoulder hieght i believe 12 inch would be right as these come just below my shoulders
Date published: 2016-08-30
Rated 5 out of 5 by from Great fit and much needed! I installed these bars on my 883L and it provides a perfect riding position for me and my sons now, we are all 6 feet plus and these mini ape bar's are what the doctor ordered. It also makes the bike look great and fit and finish is again outstanding. I am glad we purchased them and it made a huge difference in the feel and look of the machine.
Date published: 2016-06-07
Rated 5 out of 5 by from Mini Ape Bars Made my sporty look so much better. They feel better and I get less cramping in my hand/wrist now. Def recommend these for anyone looking for both comfort and looks!
Date published: 2016-05-09
Rated 5 out of 5 by from Awesome!!! Purchased for my 07 Road King - A shop fit without ANY cables changes or cost!! Made my entire riding experience much better; felt better and better handling ~ Great bars for a great price!!
Date published: 2014-09-30
  • y_2017, m_3, d_23, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_PA-09-5607993T, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

is this style handlebar more like a standard style ape or a bobber style ape?

Asked by: jerry35
This is a standard type ape which the fit is perfect & looks great to boot. Really dress's up the Sportster models. Ken
Answered by: Ken103HO
Date published: 2016-10-29

I am wondering why these will not fit a 2015 xl1200C?

Asked by: jmilb10053

Can you please tell me what the width (tip-to-tip) rise and pull back are and if they will fit a 2006 Softail Standard Fxsti, cheers

I know I will need to change cables etc
Asked by: ColBoy
Hey ColBoy, Here are the measurements for the Mini-Apes, and unfortunately they are not validated to fit Softail models. You might want to try the 12 in. Fat Mini-Ape Handlebar Kit with Riser-56832-04C. P/N 56079-93T TIP-TO-TIP: 32.0 Inch BASE WIDTH: 10.0 Inch KNURL CENTER-TO-CENTER: 8.75 Inch RISE: 8.75 Inch PULLBACK: 6.50 Inch
Answered by: Rockstar883
Date published: 2016-05-23

wondering about the measurements

I believe these are the bars on my 2005 FXDWGI and when i measure from the bottom bend to the top bend i get about 12" and im wondering why these are called 10s? is it 10 inches from the bottom to the center of the grip? Im trying to figure out how tall of bars I can get without switching cables so I'd really like to know the bottom to center of grip measurement.
Asked by: McFlysDeLorean

Looking to put these on my 2006 XL1200C, What cable kit would I need?

FYI, I will be keeping the stock 6" riser on my bike. Thanks, Shane
Asked by: PaleRider12
  • y_2017, m_3, d_23, h_14CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_25
  • loc_en_US, sid_PA-09-5607993T, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

You Might Also Like

Recently Viewed

    Please Hold Your Iron Horses
    Learn how to check store availability


    You’ve been sitting idle, so your session will expire in  minutes.

    Would you like to remain signed in and continue shopping?

    Yes, keep me signed in No, sign me out

    Prices listed are generally the Manufacturer's Suggested Retail Price (MSRP), excluding taxes and shipping. Prices at local dealerships may vary. All online orders will be fulfilled and shipped by
    Harley-Davidson Motor Company as the agent for the Selling Dealer.