Free Shipping with $50 Purchase + Free Returns

Independent Control Auxiliary Lamp Wire Harness Kit-69200442

Part Number 69200442

FINAL SALE, NON-RETURNABLE

Quantity:

Available Not available Image

In Stock Online

A A A

Maximize your nighttime view down a lonely stretch of back road. This simple to install wiring harness permits independent control of your bikes auxiliary lamps, and allows the lamps to be switched on when the headlamp is in either low or high beam settings.

  • Maximizes your nighttime view
  • Easy to install
  • Wiring harness permits independent control of your bikes auxiliary lamps
  • Allows the lamps to be switched on when the headlamp is in either low or high beam settings
A A A

Fits '96-later FL Softail® and '97-'13 Road King® models equipped with auxiliary lamps.

Bike not listed?
Select your year and model to see all the parts that fit your bike.

  • SELECT
  • Model
Shop
  • Warranty

    1 year limited warranty – Go to www.h-d.com/warranty for full details
  • Sold in Unit

    Each
  • In The Box

    Wire harness and installation instructions
Independent Control Auxiliary Lamp Wire Harness Kit is rated 4.3 out of 5 by 15.
Rated 5 out of 5 by from Nice Little Upgrade I installed this on my '08 Heritage. Installation was a breeze and it works as advertised. Being able to run my auxiliary lights with my Daylighter high beam is definitely an improvement when night riding.
Date published: 2016-05-24
Rated 5 out of 5 by from Awesome Great part easy to install on a heritage softail. Really does add alot more light on the road at night. This part should come on every bike from the factory. A must have if you do alot of night riding.
Date published: 2016-04-08
Rated 4 out of 5 by from *FLSTN: Simple Installation yields better visibility This wiring harness was installed within 5 minutes on my 2013 FLSTN Soft-Tail Deluxe. *However, on my model- not all of the connections were needed as listed in the instructions. As noted on step #4, item 32A (as noted on the associated diagram) is listed as a "fender lamp connector". On my cycle, this connector was indeed located under the LEFT Front portion of the fuel tank. However, it was NOT connected, but hanging free. Thus, only ONE of the two harness wires remaining(very obvious) can be connected. The larger of the two, remaining connectors has NO purpose and was wrapped up and tucked away. After my install, I proceeded to the "Return to Service" section and tested all the lights/controls, everything worked perfectly. Indeed, I believe this should be a standard feature on the cycles with auxiliary lights. This wire harness allows for continuous use of the auxiliary lights when operating the headlights in either Low or High- Beam modes. This is a very effective way to obtain better visibility while driving at night, as well as becoming more visible to others while driving during the day.
Date published: 2015-08-17
Rated 5 out of 5 by from Let there be light Quick and easy installation! Makes a huge difference on those dark nights and remote highways. Really should have been installed this way from the factory but in any case a must have if you do any night riding...
Date published: 2015-04-19
  • y_2017, m_2, d_21, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_15
  • loc_en_US, sid_PA-11-69200442, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

will stock altinator handle the amperage draw of both passing lamps and high beam headlight along with the running lights for extended priods of time

i have a 2011 flstn
Asked by: 70flh

Where do I connect this

I have a 1997 Fatboy and cannot figure out where to connect this auxiliary harness I have looked in the headlight bucket and between the shocks where the passing like toggle switch is. Any help would be greatly appreciated
Asked by: Hitsman

Where do I connect this

I have a 1997 fat boy FLSTF and do not know where to connect this harness when I bought it I was told that it got connected in the headlight bucket there is no place in there to connect it I also did not find any place To connect it near the switch on the forks could someone please advise
Asked by: Hits

Installed one of these on my Road King Classic and still works the same as before.

I picked one of these up while holidaying in Arizona. Part number 69200442. The dealer told me it would work and on the web page is says it will also. I have a 2001 Road King Classic. The instructions say to cut the common black wire and de-pin it from 109B socket housing. I was unable to de-pin it. I did cut the wire and spliced in the black wire to the harness. Since the wire is cut it should not be doing anything. I plugged it all in but the lights work the same. When I turn on the brights the auxiliary lights turn off, There is no fender tip light on my bike and never was. I appreciate any help as we lost our dealer here and it is a two days ride to one. So I am on my own working on this. I do own a 2012 Ultra limited that I got the same type harness for and works great. It is different part number for that bike and plugs in different. It is a bit confusing as on the Canadian HD web page the harness that I got for my Ultra comes up with this part number but on the United States it appears to have the same harness attached to this part number that I picked up and installed.
Asked by: Dewey867
Hello Dewey867, Thanks for asking your question. I see you’re visiting us from outside of the United States. Welcome! Because motorcycle models in other countries have different wiring and components, our U.S. support team is unable to advise on installation or fitment related questions. Please consult with the experts at your local H-D dealership. Here’s a link to find a dealer near you: www.h-d.com/dealer. Thank You!
Answered by: JD34
Date published: 2015-04-23

HOW WILL AUX LIGHTS WORK W/O THIS HARNESS

I WANT TO MOUNT AUX LIGHTING KIT 68000051 TO 2013 FLSTF. HOW WILL THE LIGHTS BE SWITCHED ON? WILL THEY ONLY BE ON W/ LOW BEAM? I DON'T SEE A SWITCH IN THE PICTURE OF THE 69200442 HARNESS KIT, DO I NEED THIS HARNESS TO HAVE AUX LIGHTS ON W/ HIGH BEAM ON MY FATBOY? WILL IT CONNECT PROPERLY?
Asked by: DUFUSS
Hello Dufuss! You will need the entire Independent Control Auxiliary Lamp Wire Harness Kit! The installation instructions are included on USA H-D; however, I have included ONLY the "Return To Service" instructions as to how the AUX lights will work. Test the operation of the auxiliary lamps: a. Turn the ignition key switch to IGNITION, but do not start the motorcycle. The low beam headlamp should turn ON. b. Operate the auxiliary lamp switch ON and OFF. The auxiliary lamps should turn ON and OFF with switch operation. c. Toggle the headlamp dimmer switch on the left handlebar control to HI to activate the high beam. Operate the auxiliary lamp switch ON and OFF. The auxiliary lamps should turn ON and OFF with switch operation. d. Turn the ignition key switch to ACCESSORY. The headlamp should turn OFF. Operate the auxiliary lamp switch ON and OFF. The auxiliary lamps should turn ON and OFF with switch operation. e. Turn the ignition key switch to OFF. Operate the auxiliary lamp switch ON and OFF. The auxiliary lamps should not illuminate. Hope this helps!
Answered by: RowdyGrl79
Date published: 2016-03-09
  • y_2017, m_2, d_21, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_PA-11-69200442, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson
Ride Free. Ship Free. Return Free.

FREE SHIPPING AND RETURNS TO YOUR LOCAL DEALER. DETAILS

You Might Also Like

Recently Viewed

    Learn how to check store availability

    HEY, YOU STILL THERE?

    You’ve been sitting idle, so your session will expire in  minutes.


    Would you like to remain signed in and continue shopping?


    Yes, keep me signed in No, sign me out

    Prices listed are generally the Manufacturer's Suggested Retail Price (MSRP), excluding taxes and shipping. Prices at local dealerships may vary. All online orders will be fulfilled and shipped by
    Harley-Davidson Motor Company as the agent for the Selling Dealer.