Rated 5 out of 5 by 6
Rated 5 out of 5 by frogwhog Gotta love chrome
I have had this item on all my fuel injected bikes. It is clean looking and adds a little more chrome to enhance the overall appearance .
February 1, 2016
Rated 5 out of 5 by Bill505 Give Me More Chrome!
When I added the Finned Headbolt Bridge to my FLHXS I decided to add the chrome Fuel Tank Fitting Cover as well. The price was reasonable (for a Harley part anyway) and other reviews discussed the ease of installation. BTW, the Finned Headbolt Bridge is very easy to install as well.
Installation of the Fuel Tank Fitting Cover is really pretty simple. There are adhesive strips on the inside of both halves and they hold the fitting in place while you tighten the three hex nuts. As others have said, the hex nuts take a bit of patience but I was able to get everything on and connected in about 10 minutes.
The chrome fitting cover is small and rides at the bottom of the tank. Most people might not notice it, but for me it adds just a bit more refinement to the bike overall. That's why I added the Finned Headbolt Bridge -- to make my bike stand out a bit more from the stock configuration. Isn't that why we all tend to add on upgrades?
October 30, 2015
Rated 5 out of 5 by Kypresto A Chrome Jewel
This little chrome cover is beautiful. It turns a routine fitting into something worth looking at. Just the right touch for the left side of the engine. I installed the Finned Head Bolt Bridges, which really set this little beauty off nicely. Installation for this cover is a bit tricky, especially with one of the small screws that is in a tight location. Patience will be an asset during install, and most anybody should be able to do it.
November 22, 2014
Rated 5 out of 5 by Ranger LOOKS GOOD
This cover is easy to install and adds that extra little bit of refinement to you engine area. I have size 15 fingers and it is a little hard get to one of the screws in the rear. This is not a problem though. Ten minute install.
September 28, 2014