Free Shipping with $50 Purchase + Free Returns

Curved Pullback Riser

Part Number 56267-09

FINAL SALE, NON-RETURNABLE

Finish / Color: Chrome

Quantity:

A A A

These chrome-plated Curved Pullback Risers provide a comfortable riding position for those who like the shape, width, and hand position of their current handlebar, but wish it was a closer. For an ergonomically-friendly ride, these risers can be combined with a Harley-Davidson® Reduced Reach seat and Profile Low suspension components to reduce arm stretch and to plant the feet firmly on the ground.

  • 6" Curved Riser
A A A

Fits most 1.25" handlebars. Does not fit FXSB, FXSBSE and Springer™ models. Requires separate purchase of additional components. See your dealer for details.

Bike not listed?
Select your year and model to see all the parts that fit your bike.

  • SELECT
  • Model
Shop
A A A

Note

Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake line for some models. Handlebar height is regulated in many states. Check state or local laws before installation.

  • Material Content

    Aluminum
  • Material Height

    6.0 Inch
  • Material Diameter

    1.25 Inch
  • Pullback

    1.70 Inch
  • Warranty

    1 year limited warranty – Go to www.h-d.com/warranty for full details
  • Sold in Unit

    Each
  • In The Box

    Handlebar clamps, risers and screws
Curved Pullback Riser is rated 4.1 out of 5 by 8.
Rated 1 out of 5 by from FRUSTRATED I purchased these for my 2011 Fatboy Lo. They looked good but when I turned the bars left or right the risers hit the dash. Waited a week for them to come in at my local HD dealer. Now I have to try and get my money back. Probably will just give me a store credit only and seeing as it was a special order hit me with a restocking fee. Now I have to try and find a straight pair but they won't be able to find a pair for the 1.25 inch bars.
Date published: 2016-06-25
Rated 5 out of 5 by from Soooo much better! I kept my stock bars when I put a set of these risers on my 2009 Super Glide Custom... and instantly long distance riding became so much more comfortable that I almost couldn't believe it. I'm 6 feet tall with 35" sleeves and yet I still needed those stock bars moved up and back a little from the standard position. Suprisingly this small modification made a world of difference. The quality of the risers was flawless and I did NOT need to change out the clutch or front brake cables on that bike, as it had enough slack with the stock cables.
Date published: 2016-04-06
Rated 5 out of 5 by from REDUCED THE ARM STRETCH AND LOOKS GOOD These risers are heavy and thick just like original product. Easy to install and provides more options for a comfortable ride. The riser caps hide the screws since they are installed from the bottom.
Date published: 2016-03-09
Rated 5 out of 5 by from Fits great - 2013 Wide Glide The risers set my handlebars back just where I thought they would per the description. The fit is great, they look good and I'm completely satisfied.
Date published: 2015-05-10
  • y_2017, m_3, d_23, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_en_US, sid_PA-09-5626709, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

5 12inch risers on2012 fatboy lo

do i have to change any components
Asked by: arekay
Hello Arekay, You will most likely have to replace your clutch cable, upper brake line, and throttle cables, but please check with your local dealer so they can measure the components and advise what is needed for installation. Thank You!
Answered by: JD34
Date published: 2015-04-08

2009 Fat Bob

I have a 2009 Fat Bob with stock drag bars on black risers. Was wondering if I can change to the curved pull back risers without changing any control cables due to length?
Asked by: scarty111
Hello Scarty111, You should not have to replace any cables or brake lines. We suggest if you are not comfortable with checking the clearances and fitment, that you take it to your local dealer for installation. Thank you!
Answered by: JD34
Date published: 2015-02-16

6" pull back risers

What additional components are required for FXSB?
Asked by: BillFXSB
does not fit fxsb only fat boy and fat boy low
Answered by: exhaust123
Date published: 2014-08-30

I have a 2014 fat bob with factory drag bars.

Will I need to swap out the cables or wires for these curved risers to fit?
Asked by: Thebigs
MY RIDE IS A 2012 FXDF, AND THE ANSWER IS NO, THAT IS ONE OF THE GOOD THINGS ABOUT THE RISER SET, THERE IS JUST ENOUGH SLACK IN THE CABLES AND WIRES TO FIT . TAKE THE TIME TO READ AND FOLLOW INSTRUCTIONS TAKE NOTICE OF THE ANGLE AND POSITION OF THE HANDLEBAR BEFORE DOING ANY WORK. SEE REVIEW FROM MARCH 6TH THAT IS MY REVIEW
Answered by: exhaust123
Date published: 2015-02-18

2007 fatboy. my concern is in the electrical wiring. Is there enough slack to stretch to the new height with these risers?

Asked by: Sid66
  • y_2017, m_3, d_23, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_PA-09-5626709, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

You Might Also Like

Recently Viewed

    loading
    Loading...
    Please Hold Your Iron Horses
    Learn how to check store availability

    HEY, YOU STILL THERE?

    You’ve been sitting idle, so your session will expire in  minutes.


    Would you like to remain signed in and continue shopping?


    Yes, keep me signed in No, sign me out

    Prices listed are generally the Manufacturer's Suggested Retail Price (MSRP), excluding taxes and shipping. Prices at local dealerships may vary. All online orders will be fulfilled and shipped by
    Harley-Davidson Motor Company as the agent for the Selling Dealer.