Rated 4.5 out of 5 by 4
Rated 4 out of 5 by Bach88s Chrome Tour Pack Rail
Great product but I went another route than using the template. I found that it would rotate a bit when I had it on the screw holes and was throwing my holes off. Thank goodness I drilled my first hole with a micro drill bit. My bigger hole covered it after I figured out a better way for me to do this!
So I just put the grommets on the bars threaded legs. I had the tour pack taped up where the holes were to be drilled. Than I screwed the antennas down to snug it all up. I pushed the grommeted legs up to where they just kissed the lower light trim and drew circles around each side with a pen onto the tape.
Than I drilled from the outside in and held the same angle with the drill as the legs on the tour pack were foot printing. Came out factory perfect! I even siliconed the washers and screws inside the pack to make it water tight.
June 10, 2016
Rated 4 out of 5 by a1096 Chrome tour pack rail
Very nice addition to the tour pack. Wanted something to protect all those LED lights, I have to back the bike into a corner. Rated just a little lower because the template did not match exactly to where the holes had to be drilled (scary for me anyway). I enlarged the holes and it finally fit.
May 20, 2015
Rated 5 out of 5 by rshep1911 Great Addition
Mount is easy but be sure to mark your tour pack prior to drilling the holes. The template gets you close but watch the lights when installing. This part will not work if you have the chrome that covers the black rubber on your tour pack lights.
September 15, 2014
Rated 5 out of 5 by Mark1952 Good looks and protection for the tour pack
I had this put on my 2014 Ultra Limited, it not only looks good but provides the tour pack with protection for when I am backing up the bike in the garage when parking. I also added the guard rails around the saddle bags and extra run/turn/signal lights to the saddle bags which as a complete package really looks good.
March 14, 2014