Free Shipping and Returns to your local dealer Details

Chrome Center Stand-91573-09A

Part Number 91573-09A

Finish / Color:  Chrome

Quantity:

In Stock Online

A A A

Lifting your bike upright and off the side stand is ideal for cleaning and servicing, and reduces the space required for parking - handy where space is at a premium in a crowded garage, a small parking spot, or at a ride-in bike show.

  • Chrome Center Stand attaches directly to the frame and does not reduce the lean angle
  • Designed to work with all Original Equipment suspension configurations and with Profile suspension lowering kits
  • Adjustable feet can be set to lift the rear tire clear of the pavement, or to keep the rear tire on the ground for reduced lifting effort
  • Lifting lever is inconspicuously tucked away, and fits with all Harley-Davidson® Original Equipment and accessory footboards
  • Kit includes chrome stand, black mounting brackets, and all necessary installation hardware
A A A

Fits '09-later Touring models (except FLHTKSE, FLTRUSE, '07-'11 FLHTCUSE and models equipped with Adjustable Passenger Footboard Mount Kit P/N 50768-07) with Original Equipment or Profile Low Suspension.

Bike not listed?
Select your year and model to see all the parts that fit your bike.

Shop
  • Warranty
    1 year limited warranty - See Customer Service section for details
  • Sold in Unit
    Each
  • In The Box
    Chrome stand, black mounting brackets, and all necessary installation hardware
Rated 2.6 out of 5 by 14 reviewers.
Rated 5 out of 5 by This is an eye turner among other rides. It took a bit to adjust this stand but once adjusted it is easy to park the bike on this center stand and bike is very stable once supported. I especially like how others ask where I got it and how hard is it to get used to. The absolute best part is the drive off capability, just place ride in gear and drive off the stand. I would get one for every ride I own. July 31, 2013
Rated 1 out of 5 by Hits the exhaust cross-over pipe My 2016 Limited has the cross-over pipe under the engine and this stand hits the pipe. There are no adjustments available to prevent it from hitting so I returned the stand. Otherwise it works well and looks good, but does not fit the newer touring bikes with cross-over pipe underneath. Redesign the stand so it does not hit the pipe and I will buy one and change this recommendation. April 3, 2016
Rated 5 out of 5 by Much improved over the last one Put this on a new FLHTK to allow it to be parked in the garage in front of the car so it's a necessity for my use. Old (07) bike had an old center stand and it was awkward and difficult. This new one is far superior and much better design. Much better use of leverage and once you get used to it, requires much less effort to get the bike up on it. Slightly harder to get it off the stand than the previous version, but that's not a problem if you're sitting on the and just rock it off. Seems stable and sturdy enough that there's limited danger of tipping off if unattended. Very handy for putting the bike upright, on a battery charger, and sitting on it for hours learning the nav, phone and audio switchology for the Rushmore upgrade. February 24, 2016
Rated 1 out of 5 by Center Stand Issues I'm disappointed in this product. I installed the center stand on my new 2014 street glide and it worked flawlessly for 14 months. Two months out of warranty the stand warped and became a hazard to use. Nothing I could do as the stand was out of warranty so I removed the stand and discarded it. So roll the dice if you want, maybe yours will warp maybe it won't . Good luck! December 1, 2015
  • 2016-10-31 T16:00:09.095-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_14, tr_14
  • loc_en_US, sid_PA-17-9157309, prod, sort_default
2 3 4 next>>
Ask your questions. Share your answers.
5 Questions | 8 Answers

Product Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
Will this work with the the SE high flow exhaust part #6480022?
October 28, 2015
Customer avatar
by
Read all my Q&A
 
Please wait while more information about NightRyder is loaded.
Additional information about NightRyder could not be loaded.
South Louisiana
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Nope. I had to remove the stand when I upgraded to the SE High Flow exhaust system.
November 17, 2015
Customer avatar
by
Read all my Q&A
 
Please wait while more information about legs290 is loaded.
Additional information about legs290 could not be loaded.
I Ride: 2013 Ultra Classic Electra Glide
How I Ride: Touring - Solo
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Answer: 
No, this center stand will only work with a two into one exhaust pipe on the right side of the motorcycle. The foot lever on the center stand will be so close the muffler on the left side you cannot get your foot on the lever with out also getting your foot on the muffler. The foot lever needs to be re-positioned so there is enough room for it to work.
October 29, 2015
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Mark1952 is loaded.
Additional information about Mark1952 could not be loaded.
Olney, IL
I Ride: 2014 FLHTK
How I Ride: Touring - With Passenger
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Answer: 
I'm sorry, I have no answer for this question. Check with your local Harley Dealer.
October 29, 2015
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Ranger is loaded.
Additional information about Ranger could not be loaded.
Houston, TX
I Ride: 2013 Road Glide Custom
How I Ride: Touring - Solo
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Answer: 
If your exhaust has a crossover pipe, like the stock Street Glide, the stand will hit the pipe. The crossover pipe on my Street Glide Special is not round, but oval and the left leg of the center stand does hit. The right leg misses due to the bend radius of the crossover pipe. Photos attached.

I don't know why Harley flattened the crossover pipe, unless it was an attempt to miss the Center Stand in the up position?
User submitted photo
User submitted photo
October 29, 2015
Customer avatar
by
Read all my Q&A
 
Please wait while more information about TwinBay is loaded.
Additional information about TwinBay could not be loaded.
Fort Myers
I Ride: 2016 Street Glide Special
How I Ride: Touring - Solo
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
 
1 answer

2016 RGU (FLTRU)?

Is the 0.6" difference in ground clearance what prevents this from being used on a 2016 RGU as opposed to the Road Glide/Road Glide Special?
September 23, 2015
Customer avatar
by
Read all my Q&A
 
Please wait while more information about MontyMoose is loaded.
Additional information about MontyMoose could not be loaded.
West Olive, MI
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi MontyMoose,

The Chrome Center Stand will fit the 2016 FLTRU. We apologize for any confusion this may have caused, it will be added to the drop down menu shortly.

Thank you for your question.
September 25, 2015
Customer avatar
by
Read all my Q&A
 
Please wait while more information about FXS78 is loaded.
Additional information about FXS78 could not be loaded.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
The exhaust pipe and the stand are touching after installation. Also, the boots does not have enough space to properly hold the stand in place to lift the motorcycle. It is almost impossible to utilize this stand on my motorcycle. Is there anything been done to correct this error. The stand on the 2010-2013 did work great on my 2010. I have the stand that I purchased for my 2014 Limited, but cannot use it. Is there a recall on this center Stand?
User submitted photo
User submitted photo
July 9, 2015
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Rick23 is loaded.
Additional information about Rick23 could not be loaded.
Kempner, TX
I Ride: 2014 Limited FLHTK
How I Ride: Touring - Solo
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hey Rick23,
Thanks for your question. Check out the Installation Sheet located on the More Info tab. Page 2 indicates instructions for adjusting the exhaust crossover in cases where there is contact:
5. Verify that the display stand does not make contact with
the exhaust system. If the display stand contacts the
exhaust system, make the following adjustments in order
until contact is eliminated:
a. Adjust the foot pads to reduce the motorcycle display
height, if possible.
b. Loosen the display stand mounting hardware (Figure
1, items 1 and 2). Move the display stand as far forward
as possible. Tighten the mounting hardware to
specification.
c. See the service manual. Loosen exhaust system
mounting hardware. Move the exhaust system rearward,
if possible. It will not move far. Then tighten
exhaust system to specification.
6. Tighten the jamnuts securely.

Your dealer can give you a hand if you need further assistance.
July 10, 2015
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Wisco832 is loaded.
Additional information about Wisco832 could not be loaded.
Milwaukee, WI, USA
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
 
1 answer

Ground clearance?

Does this stand make the motorcycle more prone to bottoming when loading on a trailer, or going over the hump on a steep driveway? Any other cons to consider?
July 9, 2015
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Wordsmith is loaded.
Additional information about Wordsmith could not be loaded.
Orlando, FL
I Ride: 2013 Electra Glide Classic
How I Ride: Local - Solo
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
The stand has been designed to work even with bikes that have lowering kits on them. Clearance should not be a problem.
July 17, 2015
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Rockstar883 is loaded.
Additional information about Rockstar883 could not be loaded.
Milwaukee, WI
How I Ride: Local - Solo
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
 
1 answer

Fitment

Fitment details says this fits a 2014 CVO Limited FLHTKSE But the note above says:

"Fits '09-later Touring models (except FLHTCUSE2/3/4/5/6, FLHTKSE, FLTRUSE and models equipped with Adjustable Passenger Footboard Mount Kit P/N 50768-07A) with Original Equipment or Profile Low Suspension."

Does the Center Stand fit a 2014 CVO Limited FLHTKSE or not? Please clarify.

Thank you!

JoeP
June 21, 2015
Customer avatar
by
Read all my Q&A
 
Please wait while more information about JoeP61 is loaded.
Additional information about JoeP61 could not be loaded.
Johnston, RI
I Ride: 2014 CVO Limited FLHTKSE
How I Ride: Local - Solo
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Hi JoeP,

Unfortunately, no, this Chrome Center Stand does not fit a 2014 CVO FLHTKSE. We apologize for any confusion this may have caused. The fitment description will be corrected shortly.

Thank you for your question.
June 29, 2015
Customer avatar
by
Read all my Q&A
 
Please wait while more information about FXS78 is loaded.
Additional information about FXS78 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
  • 2016-10-31 T15:54:33.107-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_PA-17-9157309, prod, sort_default
1 of 1
  • 2016-10-31 T15:54:33.109-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_PA-17-9157309, prod, sort_default
1 of 1
Ride Free. Ship Free. Return Free.

FREE SHIPPING AND RETURNS TO YOUR LOCAL DEALER. DETAILS

You Might Also Like

Recently Viewed


    Prices listed are generally the Manufacturer's Suggested Retail Price (MSRP), excluding taxes and shipping. Prices at local dealerships may vary. All online orders will be fulfilled and shipped by
    Harley-Davidson Motor Company as the agent for the Selling Dealer.