Rated 4.8 out of 5 by 22
Rated 4 out of 5 by Slacker1017 Great System
I have a 2002 Ultra Classic. The installation couldn't have been any easier. Plug and play. Only drawback I have seen is that the turn signals stay on when you have the ignition switch on accessory. Could be a problem if you want to hang out and have the radio on for any extended period of time. For me it is an acceptable trade off.
October 30, 2016
Rated 5 out of 5 by Buzzard Let there be light
If you can take the seat off your bike, disconnect the maxi fuse and battery, and cut the zip tie holding the original tail light connector to the frame you can install this conversion kit. It came with parts I didn't need for my 2007 FLHR like the red turn signal lenses, wire connector and shrink tubing. If you own a 1997 - 1999 motorcycle you will need the wire connector and shrink tube as your installation is a little more complicated than plug and ride. For the '97 - '99 bikes you will also need the manual with a wiring diagram to make it easy to find the wires you have to splice to make this work.
October 21, 2016
Rated 5 out of 5 by Dadtrap Plug and Play
Put this on my 2002 FLHTCI. It took longer to take the seat off then to install this module. Snapped right into the rear tail light harness. Definitely helps with people behind you to see you. My bike has a lot of lights on it but we all know you can never have enough. One thing if you are running LED's this module will not work unless your LED's have a built in resister. If you have a load equalizer installed it also will not work with that.
May 20, 2016
Rated 5 out of 5 by Blaine69 Easy install
easy to install and provides more light when braking at night.
April 11, 2016