Rated 3.3 out of 5 by 7
Rated 2 out of 5 by pjlaintbal4 No fuse
This is definitely a flaw in there design. they have no fuse between the lights and the module. while rewiring my tail lights so that this would actually reach with the shorty fender on my sportster i turned the bike on to make sure everything was working correctly. when i turned it on it worked fine like it should. then i brushed my leg against it by accident and the module blew. i shorted it out. no big deal right? pulled my seat back off to replace the fuse that i thought it would have. nope. another 70 dollars I'm going to have to spend. make sure all your wires are secure and protected properly because theres no fuse protecting this 70 dollar module. when its not blown it works perfect
October 25, 2016
Rated 4 out of 5 by Slazzer45 Aux/Brake/light/Running
I'm guessing it doesn't work with the 1200T because you have LED lights.
Bought the XL1200C and converted to LED's. This module doesn't work with LED rear running/signal/turn lamps. It only designed for analog lights.
C'mon Harley let's get a fix for this!
August 11, 2016
Rated 5 out of 5 by jzink0883 Easy worthwhile upgrade
Quick, easy, cost-efficient way to improve rear visibility.
April 21, 2016
Rated 5 out of 5 by VitoSanDego Easy peezy upgrade.
Easy install, made blinkers in to running, brake lights no bulb change. Done in a snap. Everything was easy, the plugs only fit one way, you can't screw it up, ten minutes and you're down the road.
February 16, 2016