Free Shipping with $50 Purchase + Free Returns

LED Light Kit - Luggage Rack

Part Number 68000076




This fast acting LED Light Kit operates as a supplemental rear running light and brake light when used with the Air Foil Luggage Rack or Air Wing Sissy Bar Upright.

  • Red lens
  • High, center-mount position places the light in the line-of-sight of following vehicles
  • Bright, fast-acting red LED lamps get you noticed
  • Wiring is concealed inside the tubes for a clean, custom installation
  • For use with the Air Foil Luggage Rack P/N 54290-11 or 54291-11 and Air Wing Sissy Bar Upright P/N 52300146 or 52300147
  • Requires separate purchase of model-specific Wiring Harness Kit

Fits Air Foil Luggage Rack P/N 54290-11, 54291-11 and Air Wing Sissy Bar Upright P/N 52300146 and 52300147. Installation requires separate purchase of model-specificWiring Harness Kit.

Bike not listed?
Select your year and model to see all the parts that fit your bike.

  • Model
  • Lighting Type

  • Lens Color

  • Warranty

    1 year limited warranty – Go to for full details
  • Sold in Unit

  • In The Box

    Light assembly and mounting hardware
  • Sold Separately

    Model specific Wiring Harness Kit
LED Light Kit is rated 1.5 out of 5 by 6.
Rated 1 out of 5 by from Don't waste your $$ Not Bright at all.It does illuminate with running and brake lights, it just is not too bright. certainly not enough for daylight. Installation was easy as far as routing the wires but the connection requires you to have the proper crimp tool in order to properly fit in the connector. If you don't have the tool, you can seat the terminals, but it takes a lot of finagling the terminal crip and wire to get it small enough to fit.
Date published: 2016-09-16
Rated 2 out of 5 by from Should Be Brighter As the other reviewers already stated, this little light is not bright enough. It's not too difficult to install, and the concept of having a run/brake light at the same eye level as car drivers is valid, BUT if the light isn't bright enough, then why bother?
Date published: 2016-09-15
Rated 2 out of 5 by from Poor product This light was a pain to install, but worth having the wires internally ran. It is not very bright though. I expected more output from them, based on my previous experiences with Harley LED lights. The Electra Glo LED Saddlebag Run/Brake/Turn Lamps are a much brighter set up.
Date published: 2016-09-13
Rated 1 out of 5 by from The product design is inferior. I purchased this to add to the Air Wing Sissy Bar save yourself the headache and have dealer install or find something else. The wires are impossible to thread through the bar. There are two ridges inside the bar that the wires and the included threading cable get hung on. which make it nearly impossible to install the wires without damaging them. Once you manage to get the wires in there the rest is very easy. The light is very dim and is really only noticeable when you apply the brakes. Then you have to be looking at the light because the factory brake lights are at least twice as bite as this light.
Date published: 2016-09-08
  • y_2017, m_3, d_23, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_PA-11-68000076, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

What wiring harness?

I had previously bought saddlebag lights and added them to the bike. They use the six-way vehicle harness connector [C7] under the seat that this also uses. What wiring harness can I use, or what should I change to make this work?
Asked by: John1727

What wiring harness to use for 2015 touring?

Asked by: BrianP
Hey There BrianP! The wiring harness to use for your 2015 Road King is Part Number 69200772 -- please follow the given link:
Answered by: jessica5377
Date published: 2016-03-20

What wiring harnes kit part number do I need for a 2015 Street Bob?

Trying to price cost of entire package for both the air foil luggage rack and LED light. Thanks
Asked by: MuncieBill
Hi MuncieBill, The wiring harness you would need for your 2015 FXDB is P/N 73415-11. Thank you for your question.
Answered by: FXS78
Date published: 2016-04-04

Wiring Harness

Can you tell me which wiring harness fits this LED Light for my 2014 CVO Softail Deluxe?
Asked by: Queenie
Hey Queenie, Thank you for your question. If you are wanting to install this in the air foil luggage rack you will need harness part number: 73415-11 (wiring harness only). If you are looking for the complete LED kit for the air foil luggage rack, you will need part number: 68000009. This comes with both the LED and wiring harness. Hope this helps!
Answered by: PeteHD
Date published: 2014-09-12
  • y_2017, m_3, d_23, h_14CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_PA-11-68000076, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harleydavidson

Recently Viewed

    Please Hold Your Iron Horses
    Learn how to check store availability


    You’ve been sitting idle, so your session will expire in  minutes.

    Would you like to remain signed in and continue shopping?

    Yes, keep me signed in No, sign me out

    Prices listed are generally the Manufacturer's Suggested Retail Price (MSRP), excluding taxes and shipping. Prices at local dealerships may vary. All online orders will be fulfilled and shipped by
    Harley-Davidson Motor Company as the agent for the Selling Dealer.