MORE THAN AN OIL CHANGE

Regular service is the key to keeping your H-D® motorcycle operating at its peak. Your Harley-Davidson® dealer will service your motorcycle with factory approved methods and equipment and all that Harley know-how.

Lubricate the fuel door, Tour-Pak® carrier, and saddlebag hinges, latches, and locks. Inspect battery condition, cables, and charging system output. Lubricate clutch cable. Ensure proper cable adjustment and hand lever free play. Inspect spark plugs. Ensure proper gap setting. Inspect and lubricate brake and clutch hand levers. Inspect front brake reservoir for fluid condition and proper level. Check operation of all electrical equipment, lighting, and controls. Check tightness of all critical fasteners. Lubricate steering head bearings. Ensure proper adjustment. Inspect front tire tread depth and air pressure; adjust as needed. Check torque of all spokes (if equipped). Inspect front brake pads and discs. Ensure pad thickness is within specification. Inspect front brake lines for leaks, contact, or abrasions. Inspect air cleaner element. Clean or replace as needed. Remove and replace oil filter. Inspect condition. Tighten to specification. Inspect rear brake reservoir for fluid condition and proper level. Road test – verify component and system functions. Check for open recalls, product campaigns, trouble codes, and engine management system updates. Drain and replace engine oil; examine condition. Replace drain plug o-ring and torque to proper specification. Ensure proper oil level at operating temperature. Inspect oil lines for leaks, contact, or abrasions. Drain and replace transmission lubricant. Examine fluid condition. Replace drain plug o-ring and torque to proper specification. Inspect fuel lines and fittings for leaks, contact, or abrasion. Inspect and adjust drive belt. Inspect wheel compensator sprocket. Inspect rear tire tread depth and air pressure; adjust as needed. Check torque of all spokes (if equipped). Inspect exhaust system for leaks, cracks, and loose or missing fasteners or exhaust shields. Inspect rear brake pads and disc. Ensure pad thickness is within specification. Inspect rear brake line for leaks, contact, or abrasions. Drain and replace primary chaincase lubricant; inspect condition. Replace drain plug o-ring and torque to proper specification. Inspect clutch assembly adjustment. Ensure adjuster screw free-play and locknut torque. Check rear air suspension pressure, operation, and leakage. Inspect and lubricate jiffy stand.
Depicted are areas that are serviced during the recommended 1000 mile service for a 2010 Touring model.
Refer to owner’s manual for more details.

H-D Authorized Service

We share your passion for the road and Harley-Davidson® motorcycle that you ride. Keep your bike performing at its peak with service from your H-D® dealer.

Harley-Davidson® Authorized Service Technician on laptop

Harley-Davidson® dealers will service your motorcycle with factory-approved methods and equipment. Dealership technicians are specially trained and use advanced technologies to properly diagnose and maintain your bike. Whether it’s your first 1,000-mile checkup, 20,000-mile service, or anything in between, your dealership should be your service destination.

Service Checklist Image

More Than an Oil Change

With more than 20 specific checkpoints, front tire to tailpipe, your Harley-Davidson® dealer will service your motorcycle using factory-approved methods, equipment, and a ton of Harley® know-how.

See our Service Checklist

Harley - Davidson® Express Lane Service Center

Express Lane™ Service

With Express Lane™ Service, you don’t need to call ahead to make an appointment. Just stop in at a participating H-D® dealer when it’s convenient for you to have selected services performed on your bike in about an hour.


Services include:
  • Tire replacement
  • Brake system flush
  • Brake pad replacements
  • Engine oil and filter changes
  • Select Genuine Motor Parts and Accessories installations

Find Harley-Davidson™ Express Lane™ Near You